Continuous improvement of wind turbines represent an effective way of achieving green energy and reducing dependence on fossil fuel. Conventional lift-type horizontal axis wind turbines, which are widely used, are designed to run under high wind speed to obtain a high efficiency. Aiming to use the low-speed wind in urban areas, a novel turbine, which is called the Archimedes Spiral Wind Turbine (abbreviated as ASWT), was recently proposed for low-speed wind applications. In the current work, a numerical simulation on the five ASWT rotors with different blade angles was carried out, which were performed to predict the detailed aerodynamic performance and wake characteristics. The results show that the ASWT rotor with a large blade angle has a wider operating tip speed ratio range and a higher tip speed ratio point of maximum power coefficient within a certain range, and yet the ASWT rotor with the larger blade angle has a higher thrust coefficient. Additionally, the ASWT rotor with a large blade angle usually has a large power coefficient and thrust coefficient fluctuation amplitude. On the other hand, the ASWT rotor with a small blade angle permits the undisturbed free stream to pass through the rotor blades more easily than that with a large blade angle. This causes a stronger blockage effect for the ASWT rotor with a large blade angle. Moreover, the blade angle also has a great effect on the shape of the vortex structure. The blade tip vortex of the fixed-angle ASWT rotors is more stable than those of the variable-angle ASWT rotors. The hub vortex of the ASWT rotors with a large blade angle is stronger than those with a small blade angle. Meanwhile, the wake recovery for ASWT rotors with a small blade angle is evidently lower than those with a large blade angle.

The shaftless ducted turbine (abbreviated as SDT), as an extraordinary innovation in tidal current power generation applications, has many advantages, and a wide application prospect. The structure of an SDT resembles a ducted turbine (abbreviated as DT), as both contain blades and a duct. However, there are some structural differences between a DT and a SDT, which can cause significant discrepancy in the hydrodynamic characteristics and flow features. The present work compares the detailed hydrodynamic-energy loss characteristics of a DT and a SDT by means of computational fluid dynamics (CFD), performed by solving the 3D steady incompressible Reynolds-averaged Navier-Stokes (RANS) equations in combination with the Menter’s Shear Stress Transport (SST $k-\omega$) turbulence model and entropy production model. The results show the SDT features a higher power level at low tip speed ratio ($TSR$) and a potential reduction in potential flow resistance and disturbance with respect to the DT. Moreover, a detail entropy production analysis shows the energy loss is closely related to the flow separation and the reverse flow, and other negative flow factors. The entropy production of the SDT is lessened than that of the DT at different $TSR$. Unlike the DT, the SDT allows a large mass flow of water to leak through the open-center structure, which plays an important role in improving the wake structure and avoiding the negative flow along the central axis.