Lei Chen

Prof. Dr. Lei Chen

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2022 in APL Materials
Verified
Journal Article
Open access
PDF file
QMQian Ma
Qian Ma
QHQiao Ru Hong
Qiao Ru Hong
XGXinxin Gao
Xinxin Gao
QXQiang Xiao
Qiang Xiao
LCLei Chen
Lei Chen
TCTie Jun Cui
Tie Jun Cui
Programmable manipulations on both reflections and transmissions usually require multi-layer metasurfaces, numerous active components, and control circuits, leading to a larger profile, complicated bias circuit design, and higher cost. To address this problem, we present a highly integrated multifunctional metasurface for programmable reflections and transmissions using a single-layer metasurface and a single active component in each element. We design a multi-channel switchable structure, dominated by a single-pole triple-throw switcher, to alternatively achieve the 1-bit reflection-phase programmable modulations, total reflection, absorption, and transmission. Benefitting from the highly integrated packaging of the switcher chip and meta-structures, our scheme significantly reduces the design difficulty and improves the composite performance. The experimental results validate the capability of the proposed metasurface in realizing the multiple functions in a programmable way using the simple structure and control circuit. We believe that our design could further enrich the design methods of metasurfaces and provide new functions for information devices and systems.

20 August 2021 in Micromachines
Verified
Journal Article
Open access
PDF file
SLSisi Luo
Sisi Luo
JHJianjiao Hao
Jianjiao Hao
FYFuju Ye
Fuju Ye
JLJiaxin Li
Jiaxin Li
YRYing Ruan
Ying Ruan
LCLei Chen
Lei Chen
Looking back on the development of metamaterials in the past 20 years, metamaterials have gradually developed from three-dimensional complex electromagnetic structures to a two-dimensional metasurface with a low profile, during which a series of subversive achievements have been produced. The form of electromagnetic manipulation of the metasurface has evolved from passive to active tunable, programmable, and other dynamic and real-time controllable forms. In particular, the proposal of coding and programmable metasurfaces endows metasurfaces with new vitality. By describing metamaterials through binary code, the digital world and the physical world are connected, and the research of metasurfaces also steps into a new era of digitalization. However, the function switch of traditional programmable metamaterials cannot be achieved without human instruction and control. In order to achieve richer and more flexible function regulation and even higher level metasurface design, the intelligence of metamaterials is an important direction in its future development. In this paper, we review the development of tunable, programmable, and intelligent metasurfaces over the past 5 years, focusing on basic concepts, working principles, design methods, manufacturing, and experimental validation. Firstly, several manipulation modes of tunable metasurfaces are discussed; in particular, the metasurfaces based on temperature control, mechanical control, and electrical control are described in detail. It is demonstrated that the amplitude and phase responses can be flexibly manipulated by the tunable metasurfaces. Then, the concept, working principle, and design method of digital coding metasurfaces are briefly introduced. At the same time, we introduce the active programmable metasurfaces from the following aspects, such as structure, coding method, and three-dimensional far-field results, to show the excellent electromagnetic manipulation ability of programmable metasurfaces. Finally, the basic concepts and research status of intelligent metasurfaces are discussed in detail. Different from the previous programmable metamaterials, which must be controlled by human intervention, the new intelligent metamaterials control system will realize autonomous perception, autonomous decision-making, and even adaptive functional manipulation to a certain extent.

3 December 2019 in Journal of Physics D: Applied Physics
Verified
Journal Article
Closed access
PDF file
YRYing Ruan
Ying Ruan
QNQian Fan Nie
Qian Fan Nie
LCLei Chen
Lei Chen
HCHao Yang Cui
Hao Yang Cui
Due to the emergence of 5G technology and wide applications for the internet of things (IoT), metamaterials are expected to have stronger adaptability and higher performance. However, numerous previous metamaterials based on indium tin oxide (ITO) film fail to be electrically tunable and need external power. In this work, we propose an optically transparent and reconfigurable metasurface based on ITO film with varactor diodes. By varying the capacitances of varactors incorporated into the elements, the phase responses can be modulated as desired. In addition, based on these designed elements, we present four schemes to realize distinct scattering fields. In order to achieve an autonomous power supply for the metasurface, we integrate a solar cell by using the transparency of ITO. The simulated and measured results have good accordance, which demonstrates the excellent performance of the proposed metasurface. This work facilitates the flexibility of metasurfaces and paves the way for applications in outside communications.

19 August 2020 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
LCLei Chen
Lei Chen
QNQian Fan Nie
Qian Fan Nie
YRYing Ruan
Ying Ruan
HCHao Yang Cui
Hao Yang Cui
Combining thermal field sensing with microwave manipulation has always been a widely pursued topic for metamaterials for some time. However, most temperature-sensitive designs for metamaterials and metasurfaces are still limited in the single absorption manipulation. In this paper, we present a metasurface with programmable wave-front modulation for distributed thermal sensing. An element integrated with a Positive-Intrinsic-Negative (PIN) diode was designed for 1-bit phase response control, while a column of thermistors was applied for the distributed thermal stimulus. When the thermistors in distinct positions sensed the heat, a voltage control circuit directly changed the on–off states of diodes, to generate specific scattering fields. To demonstrate this behavior, a metasurface sample with 25 × 27 elements was designed, fabricated, and measured using four patterns. The results show great consistency with the simulation data, thereby validating the design.

17 May 2022 in Optics Express
Verified
Journal Article
Closed access
LCLei Chen
Lei Chen
FYFu Ju Ye
Fu Ju Ye
MCMu Cuo
Mu Cuo
SLSi Si Luo
Si Si Luo
JHJian Jiao Hao
Jian Jiao Hao
HCHao Yang Cui
Hao Yang Cui
Combining digital information science with metasurface technology is critical for achieving arbitrary electromagnetic wave manipulation. However, there is a scarcity of contemporary scholarly studies on this subject. In this paper, we propose an Ultraviolet (UV) sensing metasurface for programmable electromagnetic scattering field manipulation by combining light control with a microwave field. The active sensing of UV light and the real-time reaction of the scattering are achieved by integrating four UV sensors on the metasurface. On the metasurface, a UV sensor ML8511 and a voltage driver module are coupled to control each row of the Positive-Intrinsic-Negative (PIN) diodes. Due to the light sensing capability of the UV sensor, the on or off state of the PIN diode integrated into the programmable metasurface can be switched efficiently through the change of light. When the incident wave changes, various discrete data are transmitted to the FPGA. Then the FPGA performs the corresponding voltage distribution to control the state of the PIN diode. Finally, different metasurface coding sequences are generated to realize different electromagnetic functions. As a result, the spatial distribution of sensing light by sensors can be used to determine the electromagnetic field and connect sensing optical information with the microwave field. The simulation and measured results show that this design is feasible. This work provides a dimension for electromagnetic waves modulation.

9 February 2021 in Optics Express
Verified
Journal Article
Open access
PDF file
SLSi Si Luo
Si Si Luo
YRYing Ruan
Ying Ruan
LCLei Chen
Lei Chen
Recently, optically-transparent metasurface based on indium tin oxide (ITO) film has attracted wide attention due to its remarkable optical and electromagnetic characteristics. However, most previous researches on the ITO film mainly focus on the absorption because of its prominent loss-resistance property, but neglecting the further exploration on programmable functions. Here, we present a programmable metasurface based on an optically-transparent ITO glass, on which varactors are integrated to achieve flexible amplitude manipulation range of about 25 dB. More importantly, the presented programmable design can be applied for direct modulation on the carrier incident wave with the desired pre-designed analog wave-form. Within the 10 MHz modulation speed, both programmable amplitude manipulation and analog information modulation are demonstrated in the measurements, showing good agreement with theoretical analysis and simulations. Combining both optical transparency and programmable modulation capability, the presented metasurface will promote the potential applications in wireless communication, internet of things and other smart scenarios.