Mesoporous polymeric aerogels with high compressibility and durability have attracted great attention due to their environmentally sustainable applications. However, it is still challenging to develop polymeric aerogels in a simple, low-cost and mass produced way. Herein, we report a strategy to prepare a high porosity polymeric nanofibrous aerogel (referred to as NFA) by direct freeze-drying of the poly(vinyl alcohol-co-ethylene) (PVA-co-PE) nanofibrous suspension. It is noteworthy that this process is free of gelation and any solvent exchange. In addition, the PVA-co-PE nanofibers were mass-produced from our production line, based on a high throughput Melt-Extrusion-Phase-Separation technique. Additionally, the network of the NFA aerogels can be tuned by the host–guest assembly of the nanofibers and the foreign PVA nano-lamellae from disordered/ordered cellular to a leaf-like structure. Further modification of the NFA by gaseous methyltrichlorosilane (MTS) led to covalently bonded siloxane nanoparticles formed on the surface, thereby facilely realizing the nanofibrous aerogel from hydrophilic to hydrophobic as well as achieving excellent resilience. The corresponding hydrophobic aerogel (designated as HNFA) possessed a slightly larger density of 11.1 mg cm−3 with an almost unchanged porosity of 99% and meso–macroporous pores of 5–100 nm compared with the NFA (8.3 mg cm−3). They are demonstrated as good thermal insulators (0.033–0.044 W m−1 K−1), high-performance air filters (99.2% filtration efficiency with 64 Pa pressure drop), organic pollutants absorbers (2500–5329% weight gain) and continuous water/oil separators. Therefore, this study opens up a new approach for simple and large-scale preparation of polymeric aerogels for versatile applications.
Inspired by the Chinese Knotting weave structure, an electromagnetic interference (EMI) nanofiber composite membrane with a twill surface was prepared. Poly(vinyl alcohol-co-ethylene) (Pva-co-PE) nanofibers and twill nylon fabric were used as the matrix and filter templates, respectively. A Pva-co-PE-MXene/silver nanowire (Pva-co-PE-MXene/AgNW, PMxAg) membrane was successfully prepared using a template method. When the MXene/AgNW content was only 7.4 wt% (PM7.4Ag), the EMI shielding efficiency (SE) of the composite membrane with the oblique twill structure on the surface was 103.9 dB and the surface twill structure improved the EMI by 38.5%. This result was attributed to the pre-interference of the oblique twill structure in the direction of the incident EM wave, which enhanced the probability of the electromagnetic waves randomly colliding with the MXene nanosheets. Simultaneously, the internal reflection and ohmic and resonance losses were enhanced. The PM7.4Ag membrane with the twill structure exhibited both an outstanding tensile strength of 22.8 MPa and EMI SE/t of 3925.2 dB cm−1. Moreover, the PMxAg nanocomposite membranes demonstrated an excellent thermal management performance, hydrophobicity, non-flammability, and performance stability, which was demonstrated by an EMI SE of 97.3% in a high-temperature environment of 140 °C. The successful preparation of surface-twill composite membranes makes it difficult to achieve both a low filler content and a high EMI SE in electromagnetic shielding materials. This strategy provides a new approach for preparing thin membranes with excellent EMI properties.
Mechanochromic cholesteric liquid crystal elastomer (CLCE) are unique anisotropic rubbers with programmable optical properties in response to external stimuli, bringing considerable interest in display, sensing, and smart textiles. However, creating mechanochromic CLCE fibers with high sensitivity, excellent resilience, and stable color‐changing reversibility is still a challenge. This work describes mechanochromic CLCE symmetric hollow fibers with excellent radial helix alignment prepared by solvent evaporation‐induced assembly and template assistance. The cylindrical symmetry renders the response identical in all directions perpendicular to the fiber axis. The hollow fibers show mechanochromic ability in the full visible spectrum, a large wavelength blueshift of 2.25 nm·% −1 under low strain. Excellent mechanochromic reversibility of 100 cycles and resilience are both devoted by cross‐linking structure in the wall layer, which also contributes to reversible orientation‐recovery of liquid crystal units during stretching‐recovery cycles. Numerical models and experimental measurements demonstrate the hollow structure enabled fibers to produce air pressure inside when being stretched, and the fiber wall layer is subjected to greater stress compared to solid fibers, thus achieving high mechanochromic sensitivity. In addition, hollow fiber can still change color when subjected to the expansion stress inside the cavity, and programmable information display in fabric prolongs its application in intelligent textiles.