Gait phase detection is of great significance in the field of motion analysis and exoskeleton-assisted walking, and can realize the accurate control of exoskeleton robots. Therefore, in order to obtain accurate gait information and ensure good gait phase detection accuracy, a gait recognition framework based on the New Hidden Markov Model (NHMM) is proposed to improve the accuracy of gait phase detection. A multi-sensor gait data acquisition system was developed and used to collect the training data of eight healthy subjects to measure the acceleration and plantar pressure of the human body. Accuracy of the recognition framework, filtering algorithm and window selection, and the missing validation of the generalization performance of the method were evaluated. The experimental results show that the overall accuracy of NHMM is 94.7%, which is better than all other algorithms. The generalization of the performance is 84.3%. The results of this study provide a theoretical basis for the design and control of the exoskeleton.
The real-time gait phase of human lower extremity is the foundation for wearable robots to provide precise and complex assistance strategies in human-robot interaction. In addition to strengths in estimation performance, it is crucial to make the devices portable and user-friendly that can drive the adoption in the unstructured environments. In this paper, we present an online continuous gait phase estimation system based on multi-source flexible sensors that address this issue. Specifically, we utilize two soft bend sensors mounted around the hip joint and a set of flexible pressure sensors mounted on the bottom of the foot to track the real-time motion of the lower limbs. The adaptive nonlinear frequency oscillators (ANFOs) are used to couple with the captured motion to generate a sequential, linearly growing gait phase. Moreover, heel strike events are detected to calculate phase shift and synchronize the phase with practical action. A uniform walking experiment validates the performance of the proposed method. The experiment results demonstrate that our approach could provide accurate gait phase information and has the potential to improve the interaction transparency of exoskeleton robots in the future.
1 December 2022 in Journal of Physics: Conference Series
A multi-channel sEMG signal acquisition system based on the analog front-end chip ADS1299 is designed. The whole acquisition system consists of a 2×9 high-density electrode array, ADS1299 multi-channel high-precision A/D conversion chip; A MCU named STM32F103C8, an upper computer, and PC. We carried out electrode array design, The introduction of the function of the ADS1299 chip, and the circuit design of the analog signal acquisition part. The test results show that the acquisition system designed in this paper can ideally collect the sEMG signal of 8 channels on the back of the hand, which proves the effectiveness of this design in extracting weak EMG signals. Therefore, it has reference significance for designing larger-scale sEMG signal acquisition circuits.
5 April 2023 in IEEE Robotics and Automation Letters
Gait symmetry training plays an essential role in the rehabilitation of hemiplegic patients. Robotics-based gait training has been widely accepted by patients and clinicians. Reference trajectory generation for the affected side using the motion data of the unaffected side is an important way to achieve this. However, online generation of gait reference trajectory requires the algorithm to provide correct gait phase delay and could reduce the impact of measurement noise from sensors and input uncertainty from users. Based on an active knee orthosis (AKO) prototype, this work presents an adaptive symmetric gait trajectory generation framework for the gait rehabilitation of hemiplegic patients. Using the adaptive nonlinear frequency oscillators (ANFO) and movement primitives, we implement online gait pattern encoding and adaptive phase delay according to the real-time user input. A shared autonomy (SA) module with online input validation and arbitration has been designed to prevent undesired movements from being transmitted to the actuator on the affected side. The experimental results demonstrate the feasibility of the framework. Overall, this work suggests that the proposed method has the potential to perform gait symmetry rehabilitation in an unstructured environment and provide a kinematic reference for torque-assistance AKO.
Objective. Customized human-machine interfaces for controlling assistive devices are vital in improving the self-help ability of upper limb amputees and tetraplegic patients. Given that most of them possess residual shoulder mobility, using it to generate commands to operate assistive devices can serve as a complementary approach to brain–computer interfaces. Approach. We propose a hybrid body-machine interface prototype that integrates soft sensors and an inertial measurement unit. This study introduces both a rule-based data decoding method and a user intent inference-based decoding method to map human shoulder movements into continuous commands. Additionally, by incorporating prior knowledge of the user’s operational performance into a shared autonomy framework, we implement an adaptive switching command mapping approach. This approach enables seamless transitions between the two decoding methods, enhancing their adaptability across different tasks. Main results. The proposed method has been validated on individuals with cervical spinal cord injury, bilateral arm amputation, and healthy subjects through a series of center-out target reaching tasks and a virtual powered wheelchair driving task. The experimental results show that using both the soft sensors and the gyroscope exhibits the most well-rounded performance in intent inference. Additionally, the rule-based method demonstrates better dynamic performance for wheelchair operation, while the intent inference method is more accurate but has higher latency. Adaptive switching decoding methods offer the best adaptability by seamlessly transitioning between decoding methods for different tasks. Furthermore, we discussed the differences and characteristics among the various types of participants in the experiment. Significance. The proposed method has the potential to be integrated into clothing, enabling non-invasive interaction with assistive devices in daily life, and could serve as a tool for rehabilitation assessment in the future.