A novel quinoid–donor–acceptor strategy to design a quinoidal–aromatic conjugated polymer PAQM-BT is established. A hole mobility of up to 5.10 cm2 V−1 s−1 in OFETs is realized, which is among the highest values for quinoidal–aromatic polymers.
6 December 2023 in ACS Applied Materials & Interfaces
Reflective electrochromic devices (RECDs) based on polyaniline (PANI) have garnered significant attention due to their broad-band modulation capabilities. However, the inherent unstable molecular structure of PANI remains a major challenge, affecting both its cycling stability and modulation range. To address this issue, triphenylamine and m-phenylenediamine were introduced to prepare cross-linked PANI (CPANI) electrochromic thin films via a straightforward electrodeposition process in this paper. The thermal-infrared emissivity modulation range of the CPANI-based RECD (C-RECD) achieved great improvement in the atmospheric windows of 3–5 and 8–14 μm, with a maximum emissivity modulation range of 0.5 and 0.7, respectively. Remarkably, the C-RECD exhibits exceptional cycling stability, enduring up to 10 000 cycles, while maintaining a 70% average emissivity modulation range after cycling. The excellent modulation capability and cycling stability of the C-RECD break the record of the PANI-based RECDs. The theoretical calculations, in situ Raman spectroscopy, and emittance spectra were examined to gain insights into the crosslinking enhancement mechanism. Its distinctive cross-linked structure promotes electron delocalization within the PANI chain, which facilitates an increase in the number of polarons and hinders the formation of local quinoid over-oxidation units, thus effectively improving its emissivity modulation capability and cycling stability. The thermal-infrared images demonstrate the apparent temperature management effects at 7.2 °C and 13.3 °C when the C-RECD is integrated with human skin and a hot plate. This work provides promising opportunities for the production of long-term stable anti-reconnaissance and thermal management devices based on PANI-based RECDs.
Electrochromic smart windows (ESWs) hold great promise in improving energy efficiency in buildings. However, the production of large-scale ESWs still faces significant challenges due to equipment limitations and associated costs. This paper presents a simple, cost-effective, and environmentally friendly method for preparing Prussian blue (PB) films using a two-dimensional-material assisted in situ growth (TAIG) method. The growth mechanism of PB films prepared through the TAIG method was elucidated using SEM, TEM, and XPS characterization techniques. The PB films fabricated using the TAIG method demonstrate exceptional electrochromic properties, including multi-color modulation capabilities (colorless, blue, green, and yellow), a high optical modulation of 65.89% at 713 nm, fast switching times (5.9 s for coloring and 5.4 s for bleaching), and a high coloring efficiency of 81.73 cm2 C−1. Importantly, after 10 000 cycles, there was virtually no degradation of optical modulation of PB films. The electrochromic enhancement mechanism was elaborated in this paper. A comparison between PB films prepared via the TAIG method and the electrodeposition method was conducted using TG and GIWAXS tests. The PB films prepared through the TAIG method exhibit a low structural water content and a polycrystalline structure. DTF theoretical calculations were further carried out to confirm the lower band gap and great electron transition. Additionally, the successful fabrication of large-scale ESWs measuring 100 × 70 cm2 using the TAIG method demonstrates its practicality for industrial-scale production. Simulation studies of solar irradiation confirm the shielding capabilities of ESWs and their effectiveness in regulating indoor temperatures. In conclusion, this study represents a significant step towards the performance promotion and industrial-scale production of ESWs, contributing to the development of energy-efficient building solutions.