Speed profile optimization plays an important role in optimal train control. Considering the characteristics of an electrical locomotive with regenerative braking, this paper proposes a new algorithm for target speed profile approximation. This paper makes the following three contributions: First, it proves that under a certain calculation precision, there is an optimal coast-brake switching region—not just a point where the train should be switched from coasting mode to braking mode. This is very useful in engineering applications. Second, the paper analyzes the influence of regenerative braking on the optimal coast-brake switching region and proposes an approximate linear relationship between the optimal switching region and the regeneration efficiency. Third, the paper presents an average speed equivalent algorithm for local speed profile optimization in steep sections. In addition, this paper simplifies the proof of the optimality of smooth running on a non-steep track in two steps. The effects on energy consumption from two important factors (optimal coast and running time) are systematically analyzed. Extensive simulations verify these points of view and demonstrate that the proposed approximation approach is computationally efficient and achieves sufficient engineering accuracy.

Roller bearing plays a significant role in industrial sectors. To improve the ability of roller bearing fault diagnosis under multi-rotating situation, this paper proposes a novel roller bearing fault characteristic: the Amplitude Modulation (AM) based correntropy extracted from the Intrinsic Mode Functions (IMFs), which are decomposed by Fast Ensemble Empirical mode decomposition (FEEMD) and employ Least Square Support Vector Machine (LSSVM) to implement intelligent fault identification. Firstly, the roller bearing vibration acceleration signal is decomposed by FEEMD to extract IMFs. Secondly, IMF correntropy matrix (IMFCM) as the fault feature matrix is calculated from the AM-correntropy model of the primary vibration signal and IMFs. Furthermore, depending on LSSVM, the fault identification results of the roller bearing are obtained. Through the bearing identification experiments in stationary rotating conditions, it was verified that IMFCM generates more stable and higher diagnosis accuracy than conventional fault features such as energy moment, fuzzy entropy, and spectral kurtosis. Additionally, it proves that IMFCM has more diagnosis robustness than conventional fault features under cross-mixed roller bearing operating conditions. The diagnosis accuracy was more than 84% for the cross-mixed operating condition, which is much higher than the traditional features. In conclusion, it was proven that FEEMD-IMFCM-LSSVM is a reliable technology for roller bearing fault diagnosis under the constant or multi-positioned operating conditions, and as such, it possesses potential prospects for a broad application of uses.

To address the coupled fault diagnosis challenge between temperature sensors and equipment in traction converter cooling systems, this paper proposes a dual-level intelligent diagnostic architecture. This method achieves online sensor fault isolation and early equipment anomaly warning by leveraging spatiotemporal correlation modeling of multimodal sensor data and ensemble learning-based prediction. At the first level, it integrates multi-source parameters such as outlet temperature and pressure to establish dynamic prediction models, which are combined with adaptive threshold mechanisms for detecting various sensor faults including offset, open-circuit, and noise interference. At the second level, it monitors the status of temperature sensors through time-series analysis of inlet temperature data. Verified on an edge computing platform, the proposed method effectively resolves the coupling misdiagnosis between sensor distortion and equipment faults while maintaining physical interpretability, thereby significantly enhancing diagnostic robustness under complex operating conditions.