The collective representation within global models of aerosol, cloud, precipitation, and their radiative properties remains unsatisfactory. They constitute the largest source of uncertainty in predictions of climatic change and hamper the ability of numerical weather prediction models to forecast high-impact weather events. The joint European Space Agency (ESA)–Japan Aerospace Exploration Agency (JAXA) Earth Clouds, Aerosol and Radiation Explorer (EarthCARE) satellite mission, scheduled for launch in 2018, will help to resolve these weaknesses by providing global profiles of cloud, aerosol, precipitation, and associated radiative properties inferred from a combination of measurements made by its collocated active and passive sensors. EarthCARE will improve our understanding of cloud and aerosol processes by extending the invaluable dataset acquired by the A-Train satellites CloudSat, Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO), and Aqua. Specifically, EarthCARE’s cloud profiling radar, with 7 dB more sensitivity than CloudSat, will detect more thin clouds and its Doppler capability will provide novel information on convection, precipitating ice particle, and raindrop fall speeds. EarthCARE’s 355-nm high-spectral-resolution lidar will measure directly and accurately cloud and aerosol extinction and optical depth. Combining this with backscatter and polarization information should lead to an unprecedented ability to identify aerosol type. The multispectral imager will provide a context for, and the ability to construct, the cloud and aerosol distribution in 3D domains around the narrow 2D retrieved cross section. The consistency of the retrievals will be assessed to within a target of ±10 W m–2 on the (10 km)2 scale by comparing the multiview broadband radiometer observations to the top-of-atmosphere fluxes estimated by 3D radiative transfer models acting on retrieved 3D domains.

This paper documents the production and validation of retrieved rainfall data obtained from satellite-borne microwave radiometers by the Global Satellite Mapping of Precipitation (GSMaP) Project. Using various attributes of precipitation derived from Tropical Rainfall Measuring Mission (TRMM) satellite data, the GSMaP has implemented hydrometeor profiles derived from Precipitation Radar (PR), statistical rain/no-rain classification, and scattering algorithms using polarization-corrected temperatures (PCTs) at 85.5 and 37 GHz. Combined scattering-based surface rainfalls are computed depending on rainfall intensities. PCT85 is not used for stronger rainfalls, because strong depressions of PCT85 are related to tall precipitation-top heights. Therefore, for stronger rainfalls, PCT37 is used, with PCT85 used for weaker rainfalls. With the suspiciously strong rainfalls retrieved from PCT85 deleted, the combined rainfalls correspond well to the PR rain rates over land. The GSMaP algorithm for the TRMM Microwave Imager (TMI) is validated using the TRMM PR, ground radar [Kwajalein (KWAJ) radar and COBRA], and Radar Automated Meteorological Data Acquisition System (AMeDAS) precipitation analysis (RA). Monthly surface rainfalls retrieved from six microwave radiometers (GSMaP_MWR) are compared with the gauge-based dataset. Rain rates retrieved from the TMI (GSMaP_TMI) are in better agreement with the PR estimates over land everywhere except over tropical Africa in the boreal summer. Validation results of the KWAJ radar and COBRA show a good linear relationship for instantaneous rainfall rates, while validation around Japan using the RA shows a good relationship in the warm season. Poor results, connected to weak-precipitation cases, are found in the cold season around Japan.

The Earth Cloud, Aerosol and Radiation Explorer (EarthCARE) is a satellite mission implemented by the European Space Agency (ESA), in cooperation with the Japan Aerospace Exploration Agency (JAXA), to measure global profiles of aerosols, clouds and precipitation properties together with radiative fluxes and derived heating rates. The simultaneous measurements of the vertical structure and horizontal distribution of cloud and aerosol fields, together with outgoing radiation, will be used in particular to evaluate their representation in weather forecasting and climate models and to improve our understanding of cloud and aerosol radiative impact and feedback mechanisms. To achieve the objective, the goal is that a retrieved scene with footprint size of 10 km × 10 km is measured with sufficiently high resolution that the atmospheric vertical profile of short-wave (solar) and long-wave (thermal) flux can be reconstructed with an accuracy of 10 W m⁻² at the top of the atmosphere. To optimise the performance of the two active instruments, the platform will fly at a relatively low altitude of 393 km, with an equatorial revisit time of 25 d. The scientific payload consists of four instruments: an atmospheric lidar, a cloud-profiling radar with Doppler capability, a multi-spectral imager and a broadband radiometer. Co-located measurements from these instruments are processed in the ground segment, which produces and distributes a wide range of science data products. As well as the Level 1 (L1) product of each instrument, a large number of multiple-instrument L2 products have been developed, in both Europe and Japan, benefiting from the data synergy. An end-to-end simulator and several test scenes have been developed that simulate EarthCARE observations and provide a development and test environment for L1 and L2 processors. Within this paper the EarthCARE observational requirements are addressed. An overview is given of the space segment with a detailed description of the four science instruments, demonstrating how the observational requirements will be met. Furthermore, the elements of the space segment and ground segment that are relevant for science data users are described and the data products are introduced.