The development of high-performance CO2 capture and separation adsorbents is critical to alleviate the deteriorating environmental issues. Herein, N atom-doped layered graphene (N-MGN) was introduced to form triazine and pyridine as potential CO2 capture and separation adsorbents via regulation of interlayer spacings. Structural analyses showed that accessible surface area of the N-MGN is 2521.72 m2 g−1, the porosity increased from 9.43% to 84.86%. At ultra-low pressure, N-MGN_6.8 have exhibited a high CO2 adsorption capacity of 10.59 mmol/g at 298 K and 0.4 bar. At high pressure, the absolute adsorption capacities of CO2 in N-MGN_17.0 (40.16 mmol g−1) at 7.0 MPa and 298 K are much larger than that of N-doping slit pore. At 298 K and 1.0 bar, the highest selectivity of CO2 over N2 reached up to ~133 in N-MGN_6.8. The research shows that N doping can effectively improve the adsorption and separation capacity of CO2 and N2 in layered graphene, and the interlayer spacing has an important influence on the adsorption capacity of CO2/N2. The adsorption heat and relative concentration curves further confirmed that the layered graphene with an interlayer spacing of 6.8 Å has the best adsorption and separation ability of CO2 and N2 under low pressure. Under high pressure, the layered graphene with the interlayer spacing of 17.0 Å has the best adsorption and separation ability of CO2 and N2.
The penetration and displacement behavior of N2 molecules in porous interlayer structures containing a water/salt component with porosities of 4.29%, 4.73%, 5.17%, 7.22%, and 11.38% were explored using molecular dynamics simulations. The results demonstrated that the large porosity of the interlayer structures effectively enhanced the permeation and diffusion characteristics of N2. The water and salt in the interlayer structures were displaced during the injection of N2 in the porosity sequence of 4.29% < 4.73% < 5.17% < 7.22% < 11.38%. The high permeance of 7.12 × 10−6 indicated that the interlayer structures with a porosity of 11.38% have better movability. The strong interaction of approximately 15 kcal/mol between N2 and H2O had a positive effect on the diffusion of N2 and the displacement of H2O before it reached a stable equilibrium state. The distribution of N2 in porous interlayer structures and the relationship between the logarithm of permeability and breakthrough pressure were presented. This work highlighted the effects of porosity on the permeability and diffusion of N2/H2O in the interlayer, thus providing theoretical guidance for the development of petroleum resources.
China has abundant low-permeability oil and gas resources. A lot of practice has proved that low-permeability reservoirs must undergo hydraulic fracturing to obtain commercial production capacity. Geomechanical characteristics are the key factor for fracturing. It plays a very important role in the oil field exploration and production. It is not only the driving force for oil and gas migration, but also provides a basis for wellbore stability analysis and drilling optimization design. The state of the formation stress field and the mechanical properties of the rock jointly determine the direction, shape and orientation of the fracture extension of the fracturing. Together it affects the stimulation effect of fracturing. Realizing the high-efficiency development of low-permeability reservoirs is a key and difficult problem facing for oil filed operator. Horizontal wells drilling and hydraulic fracturing are the core technology for increasing single well production in low-permeability reservoirs. The effectiveness of reservoir reconstruction directly determines the production capacity of the reservoir. In order to clarify the influence of static and dynamic geomechanics on the scale of reservoir stimulation in the process of horizontal well fracturing, and ultimately provide effective technical support for the formulation and optimization of reservoir stimulation design. This study is based on the study of single well one-dimensional geomechanics, using the structural characteristics and seismic attributes of low-permeability reservoirs to study the characteristics of the three-dimensional spatial distribution of mechanics. On this basis, combined with real-time fracturing treatment data and micro-seismic monitoring data, dynamic (four-dimensional) stress field simulations are continuously carried out. The research results can be mainly used to guide the optimization of reservoir stimulation and the evaluation of filed development plan.