The main objective of RILEM TC LHS-277 “Specifications for testing and evaluation of lime-based repair materials for historic Structures” is the revision, adaption and, when necessary proposal, of the test methods to accurately study lime-based binding systems and mixtures, such as mortars and grouts. The empiric use of the lime-based composites and the predominant employ of cement in the field of Civil Engineering have led to the widespread application of test methods developed for cement-based composites to test the former. However, the clear differences in composition and performance between modern cement binders and lime-based materials would advise to explore specific test methods for the latter. To undertake this task the previous knowledge on the mechanisms of setting and hardening of these binders must be revised, arranged and synthesized. Processes such as drying, carbonation, hydration and pozzolanic reaction may occur during the setting and hardening of lime-based mortars and competition between them cannot be underestimated. With the aim of underpinning the revision and proposal of test methods for lime-based systems, this review paper reports a comprehensive study of the mechanisms of setting and hardening of these binders, considering the variability of the composition, which includes pure air lime as well as lime with hydraulic properties, lime-cement and lime-pozzolan systems.
1 September 2014 in Construction and Building Materials
Building stones are porous media and they can deteriorate through moisture ingress and secondary damage such as crystallization of soluble salts. Not only is this due to the increasing number of flood events in the past years but also structural damages of houses from activity such as leakage or rising moisture (groundwater) are the main causes. The potential benefit of several nondestructive testing methods to assess water damage in building stone has been studied in a field-scale experiment. Three testing walls made of fired clay brick, sandstone, and spongilite were flooded and their drying behavior monitored using infrared thermography, complex resistivity, ground penetrating radar, and ultrasonics. The results were compared to the average moisture content determined by gravimetric weighing of the specimens. Qualitatively, the results of the different nondestructive testing methods matched well. But in terms of quantitative data, some scatter was observed and the results should be viewed with care. Co...