The temperature dependences of the threshold current and slope efficiency, as represented by their respective characteristic temperature coefficients T 0 and T 1 , are discussed for quantum cascade lasers (QCLs) emitting in the 3.0-3.8 μm, 3.9-5.0 μm, 8-10 μm, and 12-16 μm wavelength ranges. Carrier-leakage mechanisms are treated with emphasis on shunt-type leakage within active regions (ARs); the dominant leakage path in state-of-the-art devices. Carrier-leakage suppression, best evidenced by the T 1 value, is shown to have been the key to effectively doubling the room-temperature pulsed and continuous-wave (CW) wallplug efficiencies for 4.5-5.0 μm emitting QCLs. By employing deep-well and/or tapered-active (TA)-type AR designs, for carrierleakage suppression, T 0 values as high as 278 K at λ = 4.8 μm and 242 K at λ = 8.4 μm have been achieved for devices of moderately high injector doping, as required for watt-range roomtemperature CW operation. Similarly, TA-type QCLs have led to record-high T 1 values: 797 K at λ = 4.8 μm, and 561 K at λ = 8.8 μm, for low-threshold (~1.6 kA cm-2) devices at room temperature. Step-taper TA (STA) AR designs for 8.4 and 8.8 μm emitting QCLs have resulted in both carrier-leakage suppression as well as fast and efficient carrier extraction. That, in turn, led to internal-differential-efficiency values in the 85-90% range; that is, 30-40% higher than for any previously reported 7-10 μm emitting QCLs. We further show that 4.6 μm emitting STA-type devices hold the potential for room-temperature CW wallplug efficiency values in excess of 27%. Should the internal differential efficiency reach theoretical limits (87-89%) at λ = 4.6 μm, singlefacet, room-temperature CW wallplug efficiency values in excess of 40% become possible.
The step-taper active-region (STA) design concept is implemented for ~5.0 μm-emitting quantum cascade lasers (QCLs) grown by metal-organic chemical vapor deposition (MOCVD). Carrier-leakage suppression yields high characteristic temperatures for the threshold-current density Jth, T0, and for the slope efficiency ηsl, T1: 226 K and 653 K. Resonant-tunneling extraction from the lower level results in miniband-like extraction. In turn, the internal efficiency ηi is found, from a variable mirror-loss study, to be ~77%; thus approaching the ~90% upper limit, when employing only inelastic scattering. Considering interface-roughness and alloy-disorder scattering, the transition efficiency reaches values of ~95%. Then, the injection efficiency is ~81%, and, for λ = 4.6 μm, the wallplug-efficiency ηwp upper limit reaches 41.2%. Results include 4.2 W/A single-facet ηsl and 0.96 kA/cm2Jth values. Buried-heterostructure (BH) QCLs provide single-facet 2.6 W continuous-wave (CW) power and 12% CW ηwp. Optimized 8 μm-emitting, STA-design QCLs provide 2 W/A ηsl, and 1.1 kA/cm2Jth; and BH devices yield single-facet 1 W CW power and 6% CW ηwp.
The equations for threshold-current density , differential quantum efficiency , and maximum wallplug efficiency for quantum-cascade lasers (QCLs) are modified for electron leakage and backfilling. A thermal-excitation model of “hot” injected electrons from the upper laser state to upper active-region states is used to calculate leakage currents. The calculated characteristic temperature for is found to agree well with experiment for both conventional and deep-well (DW) QCLs. For conventional QCLs is found to be strongly temperature dependent; explaining experimental data. At 300 K for optimized DW-QCLs, front-facet, continuous-wave values are projected.
Five, 8.36 μm-emitting quantum-cascade lasers (QCLs) have been monolithically phase-locked in the in-phase array mode via resonant leaky-wave coupling. The structure is fabricated by etch and regrowth which provides large index steps (Δn = 0.10) between antiguided-array elements and interelement regions. Such high index contrast photonic-crystal (PC) lasers have more than an order of magnitude higher index contrast than PC-distributed feedback lasers previously used for coherent beam combining in QCLs. Absorption loss to metal layers inserted in the interelement regions provides a wide (∼1.0 μm) range in interelement width over which the resonant in-phase mode is strongly favored to lase. Room-temperature, in-phase-mode operation with ∼2.2 kA/cm2 threshold-current density is obtained from 105 μm-wide aperture devices. The far-field beam pattern has lobewidths 1.65× diffraction limit (D.L.) and 82% of the light in the main lobe, up to 1.8× threshold. Peak pulsed near-D.L. power of 5.5 W is obtained, with 4.5 W emitted in the main lobe. Means of how to increase the device internal efficiency are discussed.
The performances of mid-infrared (IR) quantum cascade lasers (QCLs) are now reaching a maturity level that enables a variety of applications which require compact laser sources capable of watt-range output powers with high beam quality. We review the fundamental design issues and current performance limitations, focusing on InGaAs/AlInAs/InP QCLs with emission in the 3-6 μm wavelength range. Metamorphic materials broaden the available compositions for accessing short emission wavelengths (λ $ \leq $ 3.5 μm) or for integration with GaAs- and Si-photonics platforms. Conduction-band engineering through the use of varying compositions throughout the active-region structure has been utilized to achieve the highest performance levels to date. Interface roughness scattering plays a dominant role in determining both the lower-laser-level lifetime as well as the carrier-leakage current. Numerous approaches have been implemented in attempts to control, scale, and stabilize the spatial mode to high output powers. Of all approaches photonic-crystal structures with high built-in index contrast, thus capable of maintaining modal properties under strong self-heating, are the most promising device configuration for achieving single-spatial-mode, single-lobe reliable CW operation to multiwatt-range power levels. Such devices have demonstrated to date >5W front-facet output powers with diffraction-limited beams in short-pulse operation.