The fast and precise fabrication of micro-devices based on single flakes of novel 2D materials and stacked heterostructures is vital for exploration of novel functionalities. In this paper, we demonstrate a fast high-resolution contact mask lithography through a simple upgrade of metallographic optical microscope. Suggested kit for the micromask lithography is compact and easily compatible with a glove box, thus being suitable for a wide range of air-unstable materials. The shadow masks could be either ordered commercially or fabricated in a laboratory using a beam lithography. The processes of the mask alignment and the resist exposure take a few minutes and provide a micrometer resolution. With the total price of the kit components around USD 200, our approach would be convenient for laboratories with the limited access to commercial lithographic systems.
This paper presents a home-built projection lithographer designed to transfer the image from a DLP (digital light processing) projector MEMS matrix onto the microscope objective’s field of view, where a photoresist-covered substrate is placed. The photoresist is exposed using blue light with a wavelength of 450 nm. To calibrate the device and adjust focal lengths, we utilize a red light that does not affect the photoresist. The substrate is located on a movable platform, allowing the exposure field to be shifted, enabling the exposure of designs with lateral sizes of 1 × 1 cm at a resolution of a few micrometers. Our setup showcases a 2 m resolution for the single frame 200 × 100 m, and a 5 m resolution for 1 × 1 cm with field stitching. The exposure speed, approximately 1 mm/100 s, proves to be sufficient for a variety of laboratory prototyping needs. This system offers a significant advantage due to its utilization of easily accessible and budget-friendly components, thereby enhancing its accessibility for a broader user base. The exposure speed and resolution meet the requirements for laboratory prototyping in the fields of 2D materials, quantum optics, superconducting microelectronics, microfluidics, and biology.
We present a microscope equipped with a video camera as an educational tool. This system can be fabricated either from a standard microscope or assembled from inexpensive, commercially available components (objectives, beam splitters, LEDs, linear stages) and 3D-printed elements. We demonstrate how usage of interference filters in combination with white light-emitting diode (LED) illumination enables the quantitative study of optical phenomena such as refraction, interference (e.g., Newton's rings), Fresnel diffraction, and Fraunhofer diffraction. Thus, this instrument can be used in an instructional laboratory to illustrate the theoretical foundations of an undergraduate optics course and beyond.