A tritium breeding blanket (TBB) is an essential component in a fusion reactor, which has functions of tritium breeding, energy generation and neutron shielding. Tritium breeding ratio (TBR) is a key parameter to evaluate whether the TBB could produce enough tritium to achieve tritium self-sufficiency (TBR > 1) for a fusion reactor. Current codes or software struggle to meet the requirements of high efficiency and high automation for neutronic optimization of the TBB. In this paper, the multiphysics coupling and automatic neutronic optimization method study for a solid breeder TBB is performed, and a corresponding code is developed. A typical module of China fusion engineering test reactor (CFETR) helium cooled ceramic breeder (HCCB) TBB was selected, and a 3D neutronics model of an initial scheme is developed. The automatic neutronic optimization was performed by using the developed code for verification. Results indicate that the TBR could increase from 1.219 to 1.282 (~5.17% improvement), and that the maximum temperature of each type of material in the optimized scheme is below the allowable temperature. It is of great scientific significance and engineering value to explore and study the algorithm for automatic neutronic optimization and the code development of the TBB.
Using the Monte Carlo transport code MCNP, neutronic calculation analysis for China helium cooled ceramic breeder test blanket module (CN HCCB TBM) and the associated shield block (together called TBM-set) has been carried out based on the latest design of HCCB TBM-set and C-lite model. Key nuclear responses of HCCB TBM-set, such as the neutron flux, tritium production rate, nuclear heating and radiation damage, have been obtained and discussed. These nuclear performance data can be used as the basic input data for other analyses of HCCB TBM-set, such as thermal-hydraulics, thermal-mechanics and safety analysis.
Tritium self-sufficiency is a critical prerequisite for future fusion reactors. The tritium breeding blanket, as the component responsible for in-vessel tritium generation, requires coordinated neutronic and engineering optimization in order to maximize its achievable tritium breeding ratio (TBR). In this work, a high-fidelity 22.5° toroidal sector neutronics model of the China Fusion Engineering Test Reactor (CFETR) equipped with a Helium-Cooled Ceramic Breeder (HCCB) blanket was established. On this basis, we developed a Multi-physics Coupling Intelligent Neutronic Optimization code (MCINO), a two-stage neutronics optimization framework that combines global exploration by simulated annealing with subsequent local refinement. The objective was to maximize the global TBR by optimizing the radial distribution of breeder (Li 4 SiO 4 ) and neutron multiplier (Be) zones. The optimized design increased the global TBR to approximately 1.193, corresponding to an 8.36% improvement over the initial configuration. The improvement is associated with a more effective radial allocation of breeding and multiplying materials, which enhances neutron moderation, multiplication, and use for tritium production. The optimization workflow was designed to reduce the number of expensive high-fidelity transport recalculations, thereby improving computational efficiency relative to direct brute-force search. Finally, the engineering feasibility of the optimized design was checked through three-dimensional thermal–hydraulic verification, which confirmed that the representative modules remained within their prescribed operating limits. The present work provides an efficient and physically transparent framework for integrated blanket neutronics design and optimization.