In order to compare the vibration and noise exposure of STIHL’s battery-powered MSA 220 C and the combustion driven MS 201 C, a professional operator was monitored during a pre-commercial thinning operation in a twenty-year-old hardwood stand. The vibration levels were measured with a tri-axial accelerometer on the front and rear handle of both the chainsaws, and assigned to five different work elements using a video documentation. Additionally, noise levels were recorded in one-minute intervals, with a dosemeter worn by the operator. The results show that battery-powered chainsaws, when compared to combustion-driven chainsaws, can reduce the daily vibration exposure by more than 45% and the noise dose by about 78.4%, during pre-commercial thinning tasks. Replacing combustion-driven chainsaws with battery-powered ones is therefore generally recommended, to reduce occupational health risks for operators, in this respect. However, the daily vibration exposure of about 2.42 m/s2, caused by the battery-powered chainsaw on the front handle, is still very close to the daily exposure action value set by the EU directives for health and safety requirements. The daily noise exposure of 89.18 dB(A) even exceeds the upper exposure action value. Consequently, a further reduction in the vibration exposure during work is desirable. With respect to noise exposure, additional measures must be implemented for conformity with the current safety standards, making the use of hearing protectors mandatory for electric chainsaws, too.
In the field of electronic roundwood measurement, 3D-laser systems are becoming more and more important for the determination of log volume and quality. Especially the outer shape of the logs is of particular importance for the yield and should therefore be described in as much detail as possible. This study focuses on the parameter curvature and compares five different approaches to quantify the sweep of logs based on high-resolution 360°-scans of 269 debarked logs of the species spruce, oak and pine. We observed strong differences between the approaches, including the two variants that are currently approved in German sawmills. Due to our findings, we suggest the introduction of a method that is based on a calculated centerline through the log instead of considering the outer log contour for future German log grading.
Ein Patient nach einem Schlaganfall, der beim Gehen in eine Hyperextension im betroffenen Kniegelenk fällt - da liegt der Gedanke an eine Spastik nahe. Doch die Spastik muss nicht das Problem des Patienten sein. Verfolgen Sie das Clinical Reasoning des Therapeuten auf dem Weg zur Ursache.