In the current study, a three-dimensional CFD model is utilized to investigate the variation of the flow structure and bed shear stress at a single cylindrical pier during scour development. The scour development is presented by seven solidified geometries of the scour hole, collected during previous experimental work at different scour stages. Different turbulence models are evaluated and the (k-ω) model is chosen due to its relative accuracy in capturing the flow oscillation and vortex shedding at the pier downstream side with personal computer computational and storage resources. The numerical results are verified against dimensionless parameters from different previous experimental works. This research describes in detail the flow structure and bed shear stress variations through seven stages of the scour hole development. The dimensionless area-averaged circulation coefficient (Ψ_i) is developed to evaluate the changes in the vortex strength through the scouring process by eliminating the calculation area effect. It was concluded that the circulation in the (Y) direction is the main driving factor in the development of the scour hole more than the circulation in the (X) direction. The ratio between the horseshoe vortex (HV) mean size and the scouring depth (D_V/d_S) in addition to the location of the maximum bed shear stress are investigated during different stages of the scour development.

Designing hydraulic structures requires careful consideration of local scouring downstream. This study investigated the performance of trapezoidal labyrinth weirs in controlling flow and mitigating scour in straight channels through physical model experiments. Sixty configurations were examined, using weir apex angles of 20°, 45°, 60°, and 80°, heights of 30 cm, 35 cm, and 40 cm, and flow rates of 50–200 L/s. A linear weir served as a reference. The results showed that the 60° apex angle consistently outperformed other configurations, reducing scour depth by up to 41% and scour length by up to 50% compared to the linear weir. It also decreased deposition depth by 40% and length by 50%. Lowering weir height from 40 cm to 30 cm led to reductions of 35% in scour depth and 40% in scour length at low discharges. These improvements remained significant even at higher flow rates, with a 29% reduction in scour depth and 25% in scour length at 200 L/s. This study provides evidence-based recommendations for optimizing labyrinth weir designs to define the relationship between hydraulic efficiency and erosion control. It offers valuable insights into weir geometry, flow conditions, and the resulting scour and deposition patterns. These findings contribute to the optimization of labyrinth weir designs to minimize downstream bed configurations. The tests were conducted under limited flow conditions.