James Allen

Mr. James Allen

University of Plymouth
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2019 in Science of The Total Environment
Verified
Journal Article
Closed access
Rafael J. BergillosRafael J. Bergillos
Rafael J. Bergillos
CRCristobal Rodriguez-Delgado
Cristobal Rodriguez-Delgado
JAJames Allen
James Allen
Gregorio IglesiasGregorio Iglesias
Gregorio Iglesias

1 April 2019 in Ocean Engineering
Verified
Journal Article
Closed access
Rafael J. BergillosRafael J. Bergillos
Rafael J. Bergillos
CRCristobal Rodriguez-Delgado
Cristobal Rodriguez-Delgado
JAJames Allen
James Allen
GIGregorio Iglesias
Gregorio Iglesias

19 December 2016 in Sustainability
Verified
Journal Article
Open access
PDF file
JAJames Allen
James Allen
KSKonstantinos Sampanis
Konstantinos Sampanis
Jian WanJian Wan
Jian Wan
Deborah GreavesDeborah Greaves
Deborah Greaves
JMJon Miles
Jon Miles
Gregorio IglesiasGregorio Iglesias
Gregorio Iglesias
WaveCat, a novel overtopping Wave Energy Converter, was tested with the aim of determining its performance under different sea states, establishing a starting point for optimisation of the device, numerical model validation and proof-of-concept for the control systems. The tests were carried out at a 1:30 scale in the Ocean Basin of the COAST Laboratory at University of Plymouth. A state-of-the-art control system was implemented, and overtopping rates and device motions were recorded alongside the wave field. It was observed that power generation is dependent on both the wave height and period, with smaller periods tending to produce greater overtopping rates, and therefore greater power generation, for the same wave height. Due to time constraints in the laboratory, only one configuration of draft/freeboard was tested; with this configuration, overtopping occurred under significant wave heights of 0.083 m or more, corresponding to 2.5 m or more in prototype values. These experimental results form the basis for future development and optimisation of WaveCat.

Verified
Journal Article
Open access
PDF file
JAJames Allen
James Allen
Gregorio IglesiasGregorio Iglesias
Gregorio Iglesias
Deborah GreavesDeborah Greaves
Deborah Greaves
JMJon Miles
Jon Miles
The WaveCat is a moored Wave Energy Converter design which uses wave overtopping discharge into a variable v-shaped hull, to generate electricity through low head turbines. Physical model tests of WaveCat WEC were carried out to determine the device reflection, transmission, absorption and capture coefficients based on selected wave conditions. The model scale was 1:30, with hulls of 3 m in length, 0.4 m in height and a freeboard of 0.2 m. Wave gauges monitored the surface elevation at discrete points around the experimental area, and level sensors and flowmeters recorded the amount of water captured and released by the model. Random waves of significant wave height between 0.03 m and 0.12 m and peak wave periods of 0.91 s to 2.37 s at model scale were tested. The wedge angle of the device was set to 60°. A reflection analysis was carried out using a revised three probe method and spectral analysis of the surface elevation to determine the incident, reflected and transmitted energy. The results show that the reflection coefficient is highest (0.79) at low significant wave height and low peak wave period, the transmission coefficient is highest (0.98) at low significant wave height and high peak wave period, and absorption coefficient is highest (0.78) when significant wave height is high and peak wave period is low. The model also shows the highest Capture Width Ratio (0.015) at wavelengths on the order of model length. The results have particular implications for wave energy conversion prediction potential using this design of device.