Ceria based electrolyte materials have shown potential application in low temperature solid oxide fuel cells (LT-SOFCs). In this paper, Sm3+ and Nd3+ co-doped CeO2 (SNDC) and pure CeO2 are synthesized via glycine-nitrate process (GNP) and the electro-chemical properties of the nanocrystalline structure electrolyte are investigated using complementary techniques. The result shows that Sm3+ and Nd3+ have been successfully doped into CeO2 lattice, and has the same cubic fluorite structure before, and after, doping. Sm3+ and Nd3+ co-doped causes the lattice distortion of CeO2 and generates more oxygen vacancies, which results in high ionic conductivity. The fuel cells with the nanocrystalline structure SNDC and CeO2 electrolytes have exhibited excellent electrochemical performances. At 450, 500 and 550 °C, the fuel cell for SNDC can achieve an extraordinary peak power densities of 406.25, 634.38, and 1070.31 mW·cm−2, which is, on average, about 1.26 times higher than those (309.38, 562.50 and 804.69 mW·cm−2) for pure CeO2 electrolyte. The outstanding performance of SNDC cell is closely related to the high ionic conductivity of SNDC electrolyte. Moreover, the encouraging findings suggest that the SNDC can be as potential candidate in LT-SOFCs application.
Although perovskite solar cells (PSCs) based on SnO2 have reached a power conversion efficiency (PCE) over 25%, large-scale fabrication remains the main obstacle to the commercialization of PSCs. Therefore, considering the process compatibility, low-temperature processing and large-area fabrication technologies have received widespread attention as those are ideal for upscaling of single and tandem devices. Herein, we demonstrated an effective atomic layer deposition (ALD) process by using H2O2 as an oxygen source and the deposition temperatures can be lowered up to 50 °C due to the high activity of H2O2. The low temperature deposition enables conformal coverage of the substrate and results in a pinhole-free film with high optical transmittance, excellent electron extraction properties, and large area uniformity. Notably, a high PCE of 20.70% is achieved for single junction PSCs based on ALD-SnO2 (50 °C). When the ALD-SnO2 applied to p-i-n structure perovskite/silicon heterojunction tandem solar cell, an efficiency of 26.67% was obtained. The results demonstrate the potential of the low-temperature ALD processed metal oxide for large-scale manufacturing of optoelectronic devices with competitive performances.
30 December 2022 in ACS Applied Materials & Interfaces