Lithium-sulfur (Li-S) batteries are one of the most promising technologies compared to lithium-ion-based ones, mainly due to their outstanding high energy density (2,567 Wh/kg). Nonetheless, Li-S batteries still face important drawbacks, namely the shuttle effect caused by the polysulfide dissolution into the electrolyte and their escape from the cathode, leading to active material loss and ultimately to the anode passivation. Mitigating this effect is crucial to boost the Li-S technologies at a large scale and the rational design of the separator or interlayer is considered as an effective solution. Metal-Organic Frameworks and related composites have been recently proposed as candidates to selectively capture the polysulfides, due to their tunable structures and compositions and ordered micro- or meso-porosity which can sieve polysulfides through physical barriers or chemical sorption and catalyze polysulfide conversion kinetics. Moreover, once introduced into composite membranes as functional separators and interlayers, this promotes their easy inclusion in Li-S devices. This short review summarizes the recent progress in this field, emphasizing the different types of functional separators and interlayers integrating Metal-Organic Frameworks, and proposes new research directions to optimize these systems.
An alkali-metal MOF is prepared using microwave-assisted synthesis, which is converted into a carbonaceous solid at low energy costs. The MOF-derived solid functions as a promising anode for Li-ion rechargeable battery (LIB).
Lithium–sulfur batteries are considered as promising candidates for next‐generation energy storage devices for grid applications due to their high theoretical energy density. However, the inevitable shuttle effect of lithium polysulfides and/or dendrite growth of Li metal anodes hinder their commercial viability. Herein, the microporous Zr fumarate metal–organic framework (MOF)‐801(Zr) is considered to produce thin (≈15.6 μm, ≈1 mg cm2) mixed‐matrix membranes (MMM) as a novel interlayer for Li–S batteries. It is found that the MOF‐801(Zr)/C/PVDF‐HFP composite interlayer facilitates Li+ ions diffusion, and anchors polysulfides while promoting their redox conversion effectively. It is demonstrated that MOF‐801 effectively trapped polysulfides at the cathode side, and confirmed for the first time the nature of the interaction between the adsorbed polysulfides and the host framework, through a combination of solid‐state nuclear magnetic resonance and molecular dynamics simulations. The incorporation of MOF‐801(Zr)/C/PVDF‐HFP MMM interlayer results in a notable enhancement in the initial capacity of Li–S batteries up to 1110 mA h g−1. Moreover, even after 50 cycles, a specific capacity of 880 mA h g−1 is delivered.
Li-air batteries possess higher specific energies than the current Li-ion batteries. Major drawbacks of the air cathode include the sluggish kinetics of the oxygen reduction (OER), high overpotentials and pore clogging during discharge processes. Metal–Organic Frameworks (MOFs) appear as promising materials because of their high surface areas, tailorable pore sizes and catalytic centers. In this work, we propose to use, for the first time, aluminum terephthalate (well known as MIL-53) as a flexible air cathode for Li-O2 batteries. This compound was synthetized through hydrothermal and microwave-assisted routes, leading to different particle sizes with different aspect ratios. The electrochemical properties of both materials seem to be equivalent. Several behaviors are observed depending on the initial value of the first discharge capacity. When the first discharge capacity is higher, no OER occurs, leading to a fast decrease in the capacity during cycling. The nature and the morphology of the discharge products are investigated using ex situ analysis (XRD, SEM and XPS). For both MIL-53 materials, lithium peroxide Li2O2 is found as the main discharge product. A morphological evolution of the Li2O2 particles occurs upon cycling (stacked thin plates, toroids or pseudo-spheres).
Owing to their high porosity and tunability, porous solids such as Metal-Organic Frameworks (MOFs), Zeolites and Activated Carbons (ACs) are of great interest in various fields for instance gas separation, catalysis, water and air purification, among others. These materials are usually in powder form and need to be shaped in some practical way that does not modify their intrinsic property (i.e. porosity). Making porous, freestanding and flexible sheets is a relevant shaping strategy. However, achieving high loadings (> 70 wt %) can challenge mechanical properties. We have developed a new green and simple method that combines two cellulosic fibrous structures of different size, i.e. softwood bleached kraft fibres (S) and nano-fibrillated cellulose (NFC), to form a high porous solids loading (>70 wt %) paper sheet. This dual fiber system produces a synergistic effect, where S provides flexibility while NFC acts as a nanostructuring and mechanical strengthening agent with an optimal S:NFC=25:75 ratio. This method can be applied for the preparation of sheets exhibiting the mechanical properties of paper while keeping the adsorption properties of a wide range of porous solids (MOFs, ACs, Zeolites). As an exemple of application, a MOF paper has been considered for the capture of polar volatile organic compounds, showing better performance than other shaping processes such as beads and granules.