Innovative road signs that can autonomously display the speed limit in cases where the traffic situation requires it are under development. The autonomous road sign contains many types of sensors, of which the subject of interest in this article is the Doppler sensor that we have improved and the constructed and calibrated acoustic probe. An algorithm for performing vehicle detection and tracking, as well as vehicle speed measurement, in a signal acquired with a continuous wave Doppler sensor, is discussed. A method is also experimentally presented and studied for counting vehicles and for determining their movement direction by means of acoustic vector sensor application. The assumptions of the method employing spatial distribution of sound intensity determined with the help of an integrated three-dimensional (3D) sound intensity probe are discussed. The enhanced Doppler radar and the developed sound intensity probe were used for the experiments that are described and analyzed in the paper.

A method of detecting and counting road vehicles using an acoustic sensor placed by the road is presented. The sensor measures sound intensity in two directions: parallel and perpendicular to the road. The sound intensity analysis performs acoustic event detection. A normalized position of the sound source is tracked and used to determine if the detected event is related to a moving vehicle and to establish the direction of movement. The algorithm was tested on a continuous 24-h recording made in real-world conditions. The overall results were: recall 0.95, precision 0.95, F-score 0.95. In the analysis of one-hour slots, the worst results obtained in dense traffic were: recall 0.9, precision 0.93, F-score 0.91. The proposed method is intended for application in a network of traffic monitoring sensors, such as a smart city system. Its advantages include using a small, low cost and passive sensor, low algorithm complexity, and satisfactory detection accuracy.

Constant monitoring of road traffic is important part of modern smart city systems. The proposed method estimates average speed of road vehicles in the observation period, using a passive acoustic vector sensor. Speed estimation based on sound intensity analysis is a novel approach to the described problem. Sound intensity in two orthogonal axes is measured with a sensor placed alongside the road. Position of the apparent sound source when a vehicle passes by the sensor is estimated by means of sound intensity analysis in three frequency bands: 1 kHz, 2 kHz and 4 kHz. The position signals calculated for each vehicle are averaged in the analysis time frames, and the average speed estimate is calculated using a linear regression. The proposed method was validated in two experiments, one with controlled vehicle speed and another with real, unrestricted traffic. The calculated speed estimates were compared with the reference lidar and radar sensors. Average estimation error from all experiment was 1.4% and the maximum error was 3.2%. The results confirm that the proposed method allow for estimation of time-averaged road traffic speed with accuracy sufficient for gathering traffic statistics, e.g., in a smart city monitoring station.

The paper aims to discuss a case study of sensing analytics and technology in acoustics when applied to reverberation conditions. Reverberation is one of the issues that makes speech in indoor spaces challenging to understand. This problem is particularly critical in large spaces with few absorbing or diffusing surfaces. One of the natural remedies to improve speech intelligibility in such conditions may be achieved through speaking slowly. It is possible to use algorithms that reduce the rate of speech (RoS) in real time. Therefore, the study aims to find recommended values of RoS in the context of STI (speech transmission index) in different acoustic environments. In the experiments, speech intelligibility for six impulse responses recorded in spaces with different STIs is investigated using a sentence test (for the Polish language). Fifteen subjects with normal hearing participated in these tests. The results of the analytical analysis enabled us to propose a curve specifying the maximum RoS values translating into understandable speech under given acoustic conditions. This curve can be used in speech processing control technology as well as compressive reverse acoustic sensing.

This paper presents a new approach to detecting the presence of water on a road surface, employing an acoustic vector sensor. The proposed method is based on sound intensity analysis in the frequency domain. Acoustic events, representing road vehicles, are detected in the sound intensity signals. The direction of the incoming sound is calculated for the individual spectral components of the intensity signal, and the components not originating from the observed road section are discarded. Next, an estimate of the road surface state is calculated from the sound intensity spectrum, and the wet surface detection is performed by comparing the estimate with a threshold. The proposed method was evaluated using sound recordings made in a real-world scenario, and the algorithm results were compared with data from a reference device. The proposed algorithm achieved 89% precision, recall and F₁ score, and it outperforms the traditional approach based on sound pressure analysis. The test results confirm that the proposed method may be used for the detection of water on the road surface with acoustic sensors as an element of a smart city monitoring system.