Ahsan Ali

Dr. Ahsan Ali


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 March 2022 in Chemosensors
Verified
Journal Article
Open access
PDF file
AHARIF HUSSAIN
ARIF HUSSAIN
Naseem AbbasNaseem Abbas
Naseem Abbas
AAAhsan Ali
Ahsan Ali
Printing technology promises a viable solution for the low-cost, rapid, flexible, and mass fabrication of biosensors. Among the vast number of printing techniques, screen printing and inkjet printing have been widely adopted for the fabrication of biosensors. Screen printing provides ease of operation and rapid processing; however, it is bound by the effects of viscous inks, high material waste, and the requirement for masks, to name a few. Inkjet printing, on the other hand, is well suited for mass fabrication that takes advantage of computer-aided design software for pattern modifications. Furthermore, being drop-on-demand, it prevents precious material waste and offers high-resolution patterning. To exploit the features of inkjet printing technology, scientists have been keen to use it for the development of biosensors since 1988. A vast number of fully and partially inkjet-printed biosensors have been developed ever since. This study presents a short introduction on the printing technology used for biosensor fabrication in general, and a brief review of the recent reports related to virus, enzymatic, and non-enzymatic biosensor fabrication, via inkjet printing technology in particular.

Verified
Journal Article
Open access
PDF file
MHMuzamil Hussain
Muzamil Hussain
SUSami Ullah
Sami Ullah
MRMuhammad Rafi Raza
Muhammad Rafi Raza
Naseem AbbasNaseem Abbas
Naseem Abbas
AAAhsan Ali
Ahsan Ali
Zn-based biodegradable alloys or composites have the potential to be developed to next-generation orthopedic implants as alternatives to conventional implants to avoid revision surgeries and to reduce biocompatibility issues. This review summarizes the current research status on Zn-based biodegradable materials. The biological function of Zn, design criteria for orthopedic implants, and corrosion behavior of biodegradable materials are briefly discussed. The performance of many novel zinc-based biodegradable materials is evaluated in terms of biodegradation, biocompatibility, and mechanical properties. Zn-based materials perform a significant role in bone metabolism and the growth of new cells and show medium degradation without the release of excessive hydrogen. The addition of alloying elements such as Mg, Zr, Mn, Ca, and Li into pure Zn enhances the mechanical properties of Zn alloys. Grain refinement by the application of post-processing techniques is effective for the development of many suitable Zn-based biodegradable materials.

7 September 2021 in Polymers
Verified
Journal Article
Open access
PDF file
MHMushahid Hussain
Mushahid Hussain
SHSaqib Hasnain
Saqib Hasnain
NKNadir Ali Khan
Nadir Ali Khan
SBShehar Bano
Shehar Bano
FZFazeelat Zuhra
Fazeelat Zuhra
AAAhsan Ali
Ahsan Ali
In this research article, an organic polymer based polypyrrole (Ppy) composite material has been synthesized and analyzed for the design and fabrication purposes of a fast-responsive, highly sensitive, and an economical resistive-type novel humidity detection sensor. This humidity sensor most suitably serves the purpose for industrial humidity (i.e., values ranging from low to high) detection applications. First, a polypyrrole composite material (a mixture of polypyrrole, polypyrrole-NiO, polypyrrole-CeO2, and polypyrrole-Nb2O5) has been synthesized by chemical oxidative polymerization method, and then is treated at various temperatures, i.e., 100, 150 and 200 °C, respectively. After this treatment, the synthesized samples were then characterized by using FTIR, SEM, and DTA/TGA techniques for analyzing humidity sensing properties. The polypyrrole samples with the best morphological structure and properties were then incorporated on interdigitated electrodes. For the fabrication purposes of this thin film structure, at first a few drops of polyvinyl alcohol (PVA) were placed over interdigitated electrodes (IDE) and then the synthesized polypyrrole composite was uniformly deposited in the form of a thin film over it. The plots show that this is a good resistive-type humidity detection device for the relative humidity range of 30% to 90%. The response and recovery times of this newly fabricated humidity sensor were reported to be the same as 128 s at room temperature. Additionally, the stability and the repeatability response behavior of this Ppy sensor were verified up to five cycles of multiple repetitions. This presents an excellent stability and repeatability performance of the sensor. Furthermore, the capacitances versus humidity response and recovery properties of the designed sensor were studied too. This illustrates an excellent capacitive verses humidity response and shows a linear and an active behavior. Lastly, the experimental result proves that polypyrrole composite thin film shows a reasonable best performance up to a temperature of 100 °C.

27 December 2022 in Mathematics
Verified
Journal Article
Open access
PDF file
SSS M A Sharif
S M A Sharif
Rizwan Ali NaqviRizwan Ali Naqvi
Rizwan Ali Naqvi
ZMZahid Mehmood
Zahid Mehmood
JHJamil Hussain
Jamil Hussain
AAAhsan Ali
Ahsan Ali
Seung Won LeeSeung Won Lee
Seung Won Lee
Medical image acquisition devices are susceptible to producing blurry images due to respiratory and patient movement. Despite having a notable impact on such blind-motion deblurring, medical image deblurring is still underexposed. This study proposes an end-to-end scale-recurrent deep network to learn the deblurring from multi-modal medical images. The proposed network comprises a novel residual dense block with spatial-asymmetric attention to recover salient information while learning medical image deblurring. The performance of the proposed methods has been densely evaluated and compared with the existing deblurring methods. The experimental results demonstrate that the proposed method can remove blur from medical images without illustrating visually disturbing artifacts. Furthermore, it outperforms the deep deblurring methods in qualitative and quantitative evaluation by a noticeable margin. The applicability of the proposed method has also been verified by incorporating it into various medical image analysis tasks such as segmentation and detection. The proposed deblurring method helps accelerate the performance of such medical image analysis tasks by removing blur from blurry medical inputs.

29 April 2023 in Inorganics
Verified
Journal Article
Open access
PDF file
ZAZeesham Abbas
Zeesham Abbas
NANAZ ADEELA
NAZ ADEELA
SHSajjad Hussain
Sajjad Hussain
SMShabbir Muhammad
Shabbir Muhammad
HAH. Algarni
H. Algarni
JJJongwan Jung
Jongwan Jung
Three newly designed pyrochlore oxides, Eu2Tm2O7 (Tm = Hf, Sn, Zr), are analyzed for their magnetic, optical and electronic properties using ab-initio calculations within the context of density functional theory (DFT). We can refer these compounds as direct bandgap materials because there is a very slight difference between the height of bands at the Γ- and M-point. It is observed that bandgap engineering can be performed by replacing Hf with Sn and Zr. It is observed from total density of states (TDOS) plots that shape and height of curves is not the same in spin up and spin down channels, showing significant magnetic moment in these compounds. It is evident from magnetic properties that a major portion of total magnetic moment (mtot) comes from Eu-atoms. In all compounds, the magnetic moment of O, Hf, Sn and Zr atoms is negative, whereas the magnetic moment of Eu-atoms is positive, showing their antiparallel arrangement. In both spin channels, significant absorption of the incoming photons is also shown by these compounds in the ultraviolet (UV) region. We can conclude on the basis of Rω that these compounds can be utilized in applications such as anti-reflecting coatings. These compounds are potential candidates for photovoltaic applications, such as solar cells, due to efficient absorption of incoming photons in visible and UV regions.

17 October 2022 in Mathematics
Verified
Journal Article
Open access
PDF file
AAAhsan Ali
Ahsan Ali
MKMuhammad Adnan Khan
Muhammad Adnan Khan
HCHoimyung Choi
Hoimyung Choi
The hydrogen stored in liquid organic hydrogen carriers (LOHCs) has an advantage of safe and convenient hydrogen storage system. Dibenzyltoluene (DBT), due to its low flammability, liquid nature and high hydrogen storage capacity, is an efficient LOHC system. It is imperative to indicate the optimal reaction conditions to achieve the theoretical hydrogen storage density. Hence, a Hydrogen Storage Prediction System empowered with Weighted Federated Machine Learning (HSPS-WFML) is proposed in this study. The dataset were divided into three classes, i.e., low, medium and high, and the performance of the proposed HSPS-WFML was investigated. The accuracy of the medium class is higher (99.90%) than other classes. The accuracy of the low and high class is 96.50% and 96.40%, respectively. Moreover, the overall accuracy and miss rate of the proposed HSPS-WFML are 96.40% and 3.60%, respectively. Our proposed model is compared with existing studies related to hydrogen storage prediction, and its accuracy is found in agreement with these studies. Therefore, the proposed HSPS-WFML is an efficient model for hydrogen storage prediction.
1