We demonstrate the use of multiple atomic-level Rydberg-atom schemes for continuous frequency detection of radio-frequency (RF) fields. Resonant detection of RF fields by electromagnetically induced transparency and Autler-Townes (AT) splitting in Rydberg atoms is typically limited to frequencies within the narrow bandwidth of a Rydberg transition. By applying a second field resonant with an adjacent Rydberg transition, far-detuned fields can be detected through a two-photon resonance AT splitting. This two-photon AT splitting method is several orders of magnitude more sensitive than off-resonant detection using the Stark shift. We present the results of various experimental configurations and a theoretical analysis to illustrate the effectiveness of this multiple level scheme. These results show that this approach allows for the detection of frequencies in a continuous band between resonances with adjacent Rydberg states.

We demonstrate a two-dimensional (2D) grating magneto-optical trap (GMOT) with a single input cooling laser beam and a planar diffraction grating using ${}^{87}\mathrm{Rb}$. This configuration increases experimental access when compared with a traditional 2D magneto-optical trap (MOT). As described in the paper, the output flux is several hundred million rubidium atoms/s at a mean velocity of 16.5(9) m/s and a velocity distribution of 4(3) m/s standard deviation. We use the atomic beam from the 2D GMOT to demonstrate loading of a three-dimensional (3D) GMOT with $2.46\left(7\right)\times {10}^8$ atoms. Methods to improve output flux are discussed.

We investigate the effects of spatially non-uniform radio-frequency electric (E) field amplitudes on the spectral line shapes of electromagnetically induced transparency (EIT) signals in Rydberg atomic systems used in electrometry (i.e., the metrology of E-field strengths). Spatially non-uniform fields distort the EIT spectra from that of an ideal case, and understanding this distortion is important in the development of Rydberg atom-based sensors, as these distortions can limit accuracy and sensitivity. To characterize this distortion, we present a model that approximates the atom vapor as multi-layered media and then uses Beer’s law to combine the absorption through its many discrete thin segments. We present a set of expected line distortions caused by various RF electric-field distributions found in practice. This provides an intuitive diagnostic tool for experiments. We compare this model to measured experimental atomic spectra in both two-photon and three-photon excitation schemes in the presence of non-uniform radio-frequency fields. We show that we can accurately model and reproduce the EIT lineshape distortion observed in these experimental data.

We report the fabrication, characterization, and use of rubidium vapor dispensers based on highly oriented pyrolytic graphite (HOPG) intercalated with metallic rubidium. Compared to commercial chromate salt dispensers, these intercalated HOPG (IHOPG) dispensers hold an order of magnitude more rubidium in a similar volume, require less than one-fourth the heating power, and emit less than one-half as many impurities. Appropriate processing permits exposure of the IHOPG to atmosphere for over ninety minutes without any adverse effects. Intercalation of cesium, potassium, and lithium into HOPG has also been demonstrated in the literature, which suggests that IHOPG dispensers may also be made for those metals.

We present a method for generating precise, dynamically tunable magnetic potentials that can be described by a polynomial series along the axis of a cold-atom waveguide near the surface of an atom chip. With a single chip design consisting of several wire pairs, various axial potentials can be created by changing the ratio of the currents in the wires, including double wells, triple wells, and pure harmonic traps with suppression of higher-order terms. We use this method to design and fabricate a chip with modest experimental requirements. Finally, we use the chip to demonstrate a double-well potential.

Using a thermal gas, we model the signal of a trapped interferometer. This interferometer uses two short laser pulses, separated by time T, which act as a phase grating for the matter waves. Near time $2T$ , there is an echo in the cloud’s density due to the Talbot-Lau effect. Our model uses the Wigner function approach and includes a weak residual harmonic trap. The analysis shows that the residual potential limits the interferometer’s visibility, shifts the echo time of the interferometer, and alters its time dependence. Loss of visibility can be mitigated by optimizing the initial trap frequency just before the interferometer cycle begins.