Giyoung Park

Prof. Dr. Giyoung Park

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 June 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
GPGiyoung Park
Giyoung Park
SPSeung Park
Seung Park
THTaewon Hwang
Taewon Hwang
SOSangki Oh
Sangki Oh
SLSeang Wock Lee
Seang Wock Lee
A diesel particulate filter (DPF) is an after-treatment device designed to capture and store exhaust particulate matter emitted by diesel vehicles. DPFs are damaged owing to complex reasons, such as regeneration processes and loads generated during driving. While DPFs can be damaged, they can also be manipulated, especially DPFs with hollow damage. In such cases, the filtration performance deteriorates significantly, and excessive amounts of smoke and ash are emitted during driving, resulting in environmental pollution. In this study, DPF damage types were observed using the CR X-ray imaging technique without removing the DPF. In addition, it was experimentally determined that the five types of DPF shapes (normal, crack, melt, plug, and hollow) caused increases in the particle number (PN) and smoke concentration. Experiments were conducted in the Korea Diesel 147 (KD-147) vehicle driving mode, and the PN and smoke concentration were measured using a nanoparticle emission tester 3795 (NPET-3795-HC) and opacimeter (OPA-102). The experiment was conducted 10 times for each type of DPF damage. As a result of the experiment, no significant difference was found between the normal DPF and crack-damaged DPF in terms of smoke emission, but there was a definite difference in the smoke concentration relative to the other DPF damage types. DPF of all damage types satisfied Korea’s smoke concentration regulation. In addition, the PN emission characteristics differed clearly in terms of the values measured for each damage type, and, unlike the smoke concentration characteristics, there was a clear difference in the PN emission characteristics of various DPF damage types. In addition, the PN concentration tended to increase in the rapid acceleration section of the KD-147 vehicle driving mode for all DPF damage types.

1 May 2020 in Transaction of the Korean Society of Automotive Engineers
Verified
Journal Article
Open access
HRHoyoung Ryu
Hoyoung Ryu
GPGiyoung Park
Giyoung Park
YJYunmin Jeong
Yunmin Jeong
HJHongseok Jung
Hongseok Jung
SYSangkyoung Yi
Sangkyoung Yi
SLSeang Wock Lee
Seang Wock Lee

27 April 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
GPGiyoung Park
Giyoung Park
HBHyowon Bang
Hyowon Bang
SLSeang Wock Lee
Seang Wock Lee
Emergency generators normally use diesel engines. The generators need to conduct weekly no-load operation inspections to ensure stable performance in emergency situations. In particular, the generators with large diesel engines mainly use rectangle-type filter substrates. To minimize hazardous emissions generated by generators, optimizing the reduction efficiency through computational fluid dynamics (CFD) analysis of flow characteristics of particulate matter (PM)/NOX reduction system is important. In this study, we analyzed internal flow by CFD, which is difficult to confirm by experimental method. The main factors in our numerical study are the changes of flow uniformity and back pressure. As a result, the flow distribution characteristics according to the cross-sectional shape are similar at high engine loads. Spraying urea in the reverse direction increases static pressure, greatly improving flow uniformity. Raising the selective catalyst reduction (SCR) diffuser angle to 30 degrees improves both back pressure and flow uniformity characteristics, and when the porosity increases, both flow uniformity and back pressure decrease.

13 October 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
GPGiyoung Park
Giyoung Park
HRHoyoung Ryu
Hoyoung Ryu
MKManjae Kwon
Manjae Kwon
SLSeang Wock Lee
Seang Wock Lee
The diesel particulate filter of a diesel engine is an after-treatment device that removes particulate matter from exhaust emissions by filtering and oxidating them through a regeneration process. When the diesel particulate filter is damaged, a vehicle inspection is usually performed; if the cause is not found through using on-board diagnostics, then the diesel particulate filter is removed, and a visual test is conducted. However, it is not easy to find the exact cause of the diesel particulate filter being damaged, and a visual test takes a long time as the diesel particulate filter substrate is covered by a canister. In this study, using the computed radiography X-ray imaging technique, X-ray images were taken after placing an accumulated amount of carbon powder, similar to soot and ash powder in the substrate. Results confirmed that carbon powder and ash powder were shown in white in X-ray images, leading to a conclusion that distinguishing between carbon powder and ash powder is possible by analyzing the pixel value through the image processing technique. However, since pixel values alone are insufficient for exact quantitative evaluation, various studies and analyses are necessary for quantitative evaluation.

1 March 2021 in Transaction of the Korean Society of Automotive Engineers
Verified
Journal Article
Open access
YJYunmin Jeong
Yunmin Jeong
GPGiyoung Park
Giyoung Park
MKMisoo Kim
Misoo Kim
SLSeang Wock Lee
Seang Wock Lee

22 August 2023 in Aerospace
Verified
Journal Article
Open access
PDF file
JLJunWoo Lim
JunWoo Lim
SLSeang Wock Lee
Seang Wock Lee
JCJaeyeop Chung
Jaeyeop Chung
YKYoungwan Kim
Youngwan Kim
GPGiyoung Park
Giyoung Park
Aircraft reciprocating engines have been in operation over the past 100 years, which is a testament to their high levels of reliability and stability. Compared to turbine engines, reciprocating engines are at a disadvantage when it comes to high-speed flight. Nevertheless, they are widely used mainly for small aircraft thanks to their high specific power or power-to-weight ratio. Considering that propulsion systems account for approximately 40% of the aircraft price, lightness and high performance are key attributes of aircraft to achieve longer endurance. With the advantages offered by diesel engines, such as fuel economy, less maintenance, and a long lifespan, many attempts have been made to mount automotive diesel engines on urban air mobility and light aircraft. Recognizing advanced automotive diesel technology, where the power-to-weight ratio of the diesel engine is approximately 1 PS/kg, we analyzed a case where an automobile engine was converted for use in an aircraft. We focused on the Mercedes-Benz OM640 and the Austro AE300 and disassembled the two engines for comparative analysis. We then classified the engine components modified for aircraft use by (1) defining the major engine parts as fixed and alteration ones; (2) identifying the airworthiness-related alteration parts; and (3) categorizing the conversion purposes into classes A, B, and C. Components under class A were further categorized into subgroups in accordance with the airworthiness certification specifications outlined by the European Union Aviation Safety Agency. This helped determine the corresponding airworthiness standards for each subgroup. An inspection of the oil supply system revealed the need to apply safety wiring for some components to prevent possible oil leakages, which can be caused by the pressure difference with increasing altitude. Moreover, given that sensor manufacturers are required to present guidelines for sensor redundancy through numerous designs and tests and secure single-fault tolerance, we established criteria for selecting and applying sensors and separating sensors that must be made redundant from ones that are not subject to sensor redundancy.