Few-femtosecond to attosecond electron pulses are required for advancing ultrafast diffraction and microscopy to the regime of electrons in motion. Here, we report the combination of a single-electron source with a microwave cavity for pulse compression. In such an arrangement, the electron pulses can become significantly shorter than the laser pulses used for electron generation. This comes at the expense of an increase in energy spread. We report the use of an energy analyzer for characterizing microwave-compressed single-electron pulses. Phase effects, linearity, focal distances, incoming pulse durations and laser–microwave jitter are measured for three different synchronization approaches. The results demonstrate the applicability of a microwave cavity in the single-electron regime and identify jitter as the current limitation on the way to few-femtosecond, eventually attosecond pulses of single electrons.
Femtosecond vortex beams are of great scientific and practical interest because of their unique phase properties in both the longitudinal and transverse modes, enabling multi-dimensional quantum control of light fields. Until now, generating femtosecond vortex beams for applications that simultaneously require ultrashort pulse duration, high power, high vortex order, and a low cost and compact laser source has been very challenging due to the limitations of available generation methods. Here, we present a compact apparatus that generates powerful high-order femtosecond vortex pulses via astigmatic mode conversion from a mode-locked Hermite-Gaussian Yb:KGW laser oscillator in a hybrid scheme using both the translation-based off-axis pumping and the angle-based non-collinear pumping techniques. This hybrid scheme enables the generation of femtosecond vortices with a continuously tunable vortex order from the 1st up to the 30th order, which is the highest order obtained from any femtosecond vortex laser source based on a mode-locked oscillator. The average powers and pulse durations of all resulting vortex pulses are several hundred milliwatts and <650 fs, respectively. In particular, 424-fs 11th-order vortex pulses have been achieved with an average power of 1.6 W, several times more powerful than state-of-the-art oscillator-based femtosecond vortex sources.
We report on the imaging of plasmonic structures by time-of-flight-photoemission electron microscopy (ToF-PEEM) in combination with extreme ultraviolet (XUV) attosecond pulses from a high harmonic generation source. Characterization of lithographically fabricated Au structures using these ultrashort XUV pulses by ToF-PEEM shows a spatial resolution of ∼200 nm. Energy-filtered imaging of the secondary electrons resulting in reduced chromatic aberrations as well as microspectroscopic identification of core and valence band electronic states have been successfully proven. We also find that the fast valence band electrons are not influenced by space charge effects, which is essentially important for attosecond nanoplasmonic-field microscopy realization.
Thermal noise is a fundamental limitation for synchronizing microwaves to high-power lasers of low repetition rate. Here, we describe an optical enhancement scheme that concentrates the output power of a fast photodiode into a narrow range of harmonics around a microwave frequency. The scheme is entirely passive and requires no feedback or lock. Using a 5-MHz laser and a microwave at 6.2 GHz, we demonstrate an enhancement of optical-to-microwave conversion by a factor of 4000. The uncorrelated noise on time scales up to 8 min amounts to less than 4 fs, with laser pulses intense enough for pump-probe experiments of structural dynamics.
28 December 2010 in Journal of the American Chemical Society