Background: Both the superficial medial collateral ligament (sMCL) and the deep MCL (dMCL) contribute to the restraint of anteromedial (AM) rotatory instability (AMRI). Previous studies have not investigated how MCL reconstructions control AMRI. Purpose/Hypothesis: The purpose was to establish the optimal medial reconstruction for restoring normal knee kinematics in an sMCL- and dMCL-deficient knee. It was hypothesized that AMRI would be better controlled with the addition of an anatomically shaped (flat) sMCL reconstruction and with the addition of an AM reconstruction replicating the function of the dMCL. Study Design: Controlled laboratory study. Methods: A 6 degrees of freedom robotic system equipped with a force-torque sensor was used to test 8 unpaired knees in the intact, sMCL/dMCL sectioned, and reconstructed states. Four different reconstructions were assessed. The sMCL was reconstructed with either a single-bundle (SB) or a flattened hamstring graft aimed at better replicating the appearance of the native ligament. These reconstructions were tested with and without an additional AM reconstruction. Simulated laxity tests were performed at 0°, 30°, 60°, and 90° of flexion: 10 N·m valgus rotation, 5 N·m internal and external rotation (ER), and an AM drawer test (combined 134-N anterior tibial drawer in 5 N·m ER). The primary outcome measures of this force-controlled setup were anterior tibial translation (ATT; in mm) and axial tibial rotation (in degrees). Results: Sectioning the sMCL/dMCL increased valgus rotation, ER, and ATT with the simulated AM draw test at all flexion angles. SB sMCL reconstruction was unable to restore ATT, valgus rotation, and ER at 30°, 60°, and 90° of flexion to the intact state ( P < .05). Flat MCL reconstruction restored valgus rotation at all flexion angles to the intact state ( P > .05). ER was restored at all angles except at 90°, but ATT laxity in response to the AM drawer persisted. Addition of an AM reconstruction improved control of ATT relative to the intact state at all flexion angles ( P > .05). Combined flat MCL and AM reconstruction restored knee kinematics closest to the intact state. Conclusion: In a cadaveric model, AMRI resulting from an injured sMCL and dMCL complex could not be restored by an isolated SB sMCL reconstruction. A flat MCL reconstruction or an additional AM procedure, however, better restored medial knee stability. Clinical Relevance: In patients evaluated with a combined valgus and AM rotatory instability, a flat sMCL and an additional AM reconstruction may be superior to an isolated SB sMCL reconstruction.

Purpose: Surgical treatment of shoulder instability caused by anterior glenoid bone loss is based on a critical threshold of the defect size. Recent studies indicate that the glenoid concavity is essential for glenohumeral stability. However, biomechanical proof of this principle is lacking. The aim of this study was to evaluate whether glenoid concavity allows a more precise assessment of glenohumeral stability than the defect size alone. Methods: The stability ratio (SR) is a biomechanical estimate of glenohumeral stability. It is defined as the maximum dislocating force the joint can resist related to a medial compression force. This ratio was determined for 17 human cadaveric glenoids in a robotic test setup depending on osteochondral concavity and anterior defect size. Bony defects were created gradually, and a 3D measuring arm was used for morphometric measurements. The influence of defect size and concavity on the SR was examined using linear models. In addition, the morphometrical‐based bony shoulder stability ratio (BSSR) was evaluated to prove its suitability for estimation of glenohumeral stability independent of defect size. Results: Glenoid concavity is a significant predictor for the SR, while the defect size provides minor informative value. The linear model featured a high goodness of fit with a determination coefficient of R ² = 0.98, indicating that 98% of the SR is predictable by concavity and defect size. The low mean squared error (MSE) of 4.2% proved a precise estimation of the SR. Defect size as an exclusive predictor in the linear model reduced R ² to 0.9 and increased the MSE to 25.7%. Furthermore, the loss of SR with increasing defect size was shown to be significantly dependent on the initial concavity. The BSSR as a single predictor for glenohumeral stability led to highest precision with MSE = 3.4%. Conclusion: Glenoid concavity is a crucial factor for the SR. Independent of the defect size, the computable BSSR is a precise biomechanical estimate of the measured SR. The inclusion of glenoid concavity has the potential to influence clinical decision‐making for an improved and personalised treatment of glenohumeral instability with anterior glenoid bone loss.

Background: There is limited knowledge about how the anterior cruciate ligament (ACL) and capsuloligamentous structures on the medial side of the knee act to control anteromedial rotatory knee instability. Purpose: To investigate the contribution of the medial retinaculum, capsular structures (anteromedial capsule, deep medial collateral ligament [MCL], and posterior oblique ligament), and different fiber regions of the superficial MCL to restraining knee laxity, including anteromedial rotatory instability. Study Design: Controlled laboratory study. Methods: Eight fresh-frozen human cadaveric knees were tested using a 6 degrees of freedom robotic testing system in a position-controlled mode. Loads of 10 N·m valgus rotation, 5 N·m tibial external rotation, 5 N·m tibial internal rotation, and 134 N anterior tibial translation in 5 N·m external rotation were applied at different flexion angles. The motion of the intact knee at 0° to 120° of flexion was replicated after sequential excision of the sartorial fascia; anteromedial retinaculum; anteromedial capsule; anterior, middle, and posterior fibers of the superficial MCL; the deep MCL; the posterior oblique ligament; and the ACL. The reduction in force/torque indicated the contribution of each resected structure to resisting laxity. A repeated-measures analysis of variance with a post hoc Bonferroni test was used to analyze the relative force and torque changes from the intact state. Results: The superficial MCL was the most important restraint to valgus rotation from 0° to 120° and provided the largest contribution to resisting external rotation between 30° and 120° of knee flexion, gradually increasing from 25.2% ± 7.4% at 30° to 36.9% ± 15.4% at 90°. The posterior oblique ligament contributed significantly to resisting valgus rotation only in extension (17.2% ± 12.1%) but was the major restraint to internal rotation at 0° (46.7% ± 13.1%) and 30° (30.4% ± 17.7%) of flexion. The sartorial fascia and anteromedial retinaculum resisted ER at all knee flexion angles ( P < .05) and was the single most important restraint in the extended knee (19.5% ± 11%). The capsular structures (anteromedial capsule and deep MCL) had a combined contribution of 20% ± 11.5% at 0° and 23.4% ± 10.5% at 120° of knee flexion but were less important from 30° to 90°. The ACL was the primary restraint to anterior tibial translation in external rotation between 0° and 60° of flexion (50.2% ± 16.9% at 30°), but the superficial MCL was more important at 90° to 120° of knee flexion (36.8% ± 16.4% at 90°). The anterior, middle, and posterior regions of the superficial MCL contributed differently to the simulated laxity tests. The anterior fibers were the most important part of the superficial MCL in resisting external rotation and combined anterior tibial translation in external rotation. Conclusion: The superficial MCL not only was the primary restraint to valgus rotation throughout the range of knee flexion but also importantly contributed to resisting anterior tibial translation in external rotation, particularly in deeper flexion in the cadaveric model. The anterior fibers of the superficial MCL are the most important superficial MCL fibers in resisting anterior tibial translation in external rotation. This study suggests that a medial reconstruction that reproduces the function of the posterior MCL fibers and posterior oblique ligament may not best control anteromedial rotatory instability. Clinical Relevance: Based on these data, there is a need for an individualized medial reconstruction to address different types of medial injury patterns and instabilities.

Introduction: The number of atraumatic stress fractures of the scapular spine associated with reverse shoulder arthroplasty is increasing. At present, there is no consensus regarding the optimal treatment strategy. Due to the already weakened bone, fractures of the scapular spine require a high fixation stability. Higher fixation strength may be achieved by double plating. The aim of this study was to evaluate the biomechanical principles of double plating in comparison to single plating for scapular spine fractures. Methods: In this study, eight pairs (n = 16) of human shoulders were randomised pairwise into two groups. After an osteotomy at the level of the spinoglenoid notch, one side of each pair received fracture fixation with a single 3.5 LCP (Locking Compression Plate) plate. The contralateral scapular spine was fixed with a 3.5 LCP and an additional 2.7 LCP plate in 90–90 configuration. The biomechanical test protocol consisted of 700 cycles of dynamic loading and a load-to-failure test with a servohydraulic testing machine. Failure was defined as macroscopic catastrophic failure (screw cut-out, plate breakage). The focus was set on the results of specimens with osteoporotic bone quality. Results: In specimens with an osteoporotic bone mineral density (BMD; n = 12), the mean failure load was significantly higher for the double plate group compared to single plating (471 N vs. 328 N; p = 0.029). Analysis of all specimens (n = 16) including four specimens without osteoporotic BMD revealed no significant differences regarding stiffness and failure load (p > 0.05). Conclusion: Double plating may provide higher fixation strength in osteoporotic bone in comparison to a single plate alone. This finding is of particular relevance for fixation of scapular spine fractures following reverse shoulder arthroplasty. Level of evidence: Controlled laboratory study.

Purpose: To investigate the biomechanical effect of a glenolabral articular disruption (GLAD) lesion on glenohumeral laxity. Methods: Human cadaveric glenoids ( n = 10) were excised of soft tissue, including the labrum to focus on the biomechanical effects of osteochondral surfaces. Glenohumeral dislocations were performed in a robotic test setup, while displacement forces and three‐dimensional morphometric properties were measured. The stability ratio (SR), a biomechanical characteristic for glenohumeral stability, was used as an outcome parameter, as well as the path of least resistance, determined by a hybrid robot displacement. The impacts of chondral and bony defects were analyzed related to the intact glenoid. Statistical comparison of the defect states on SR and the path of least resistance was performed using repeated‐measures ANOVA and Tukey’s post hoc test for multiple comparisons ( P < .05). The relationship between concavity depth and SR was approximated in a nonlinear regression. Results: The initial SR of the intact glenoid (28.3 ± 7.8%) decreased significantly by 4.7 ± 3% in case of a chondral defect ( P = .002). An additional loss of 3.2 ± 2.3% was provoked by a 20% bony defect ( P = .004). The path of least resistance was deflected significantly more inferiorly by a GLAD lesion (2.9 ± 1.8°, P = .002) and even more by a bony defect (2.5 ± 2.9°, P = .002). The nonlinear regression with concavity depth as predictor for the SR resulted in a high correlation coefficient ( r = .81). Conclusions: Chondral integrity is an important contributor to the SR. Chondral defects as present in GLAD lesions may cause increased laxity, influence the humeral track on the glenoid during dislocation, and represent a biomechanical risk factor for a recurrent instability. Clinical Relevance: Cartilage deficiency corresponding to GLAD lesions may be a risk factor for impaired surgical outcomes.

Glenoid concavity is a crucial factor for glenohumeral stability. However, the distribution of this stability-related parameter has not been focused on in anatomical studies. In this retrospective study, computed tomography (CT) data and tactile measurements of n = 27 human cadaveric glenoids were analyzed with respect to concavity. For this purpose, the bony and osteochondral shoulder stability ratio (BSSR/OSSR) were determined based on the radius and depth of the glenoid shape in eight directions. Various statistical tests were performed for the comparison of directional concavity and analysis of the relationship between superoinferior and anteroposterior concavity. The results proved that glenoid concavity is the least distinctive in anterior, posterior, and anterosuperior direction but increases significantly toward the superior, anteroinferior, and posteroinferior glenoid. The OSSR showed significantly higher concavity than the BSSR for most of the directions considered. Moreover, the anteroposterior concavity is linearly correlated with superoinferior concavity. The nonuniform distribution of concavity indicates directions with higher stability provided by the anatomy. The linear relationship between anteroposterior and superoinferior concavity may motivate future research using magnetic resonance imaging (MRI) data to optimize clinical decision-making toward more personalized treatment of glenoid bone loss.