Grapple skidder is a machine designed for the extraction of tree bunches after felling. Several factors influence its technical performance and costs such as terrain slope, operator experience time, machine type, and the size of tree bunches for each operating cycle, among others. Thus, it becomes necessary to weigh the variables that most influence the productivity and costs of the grapple skidder. So, the main objective was evaluated according to the influence of bunch size using two feller bunchers with distinct technical characteristics, two slope classes and two skidding areas on the productivity and machine production cost in a Eucalyptus plantation. For the analysis of the productivity, the study of time and method was applied and the scheduled machine cost per hour was based on the Food and Agriculture Organization of the United Nations methods. When analyzing the results, it was found that the operational elements moving without load (MWoL) and moving with load (MWL) were the ones that spend the most time in the operational cycle of the grapple skidder. Among the cost components, monetary expenditure on fuel and operator labor were the most influential in the scheduled machine cost per hour. In conclusion, the tree bunches and slope class influenced the productivity and, consequently, the cost of the skidding operation.

The uncertainty in road transportation of wood is inherent to its operational costs, to the amount of transported wood, to the traveled distance, to its revenue, and more. Although it is not possible to measure this uncertainty fully, it can be quantified by the investment risk, which is the probability and degree of financial loss. The objective of this study is to quantify the financial risk of the investment in wood transportation through Monte Carlo simulation, which uses realistic situations to estimate the operational cost of vehicles used for road transportation of wood. We quantify these uncertainties by assessing financial risk and building pseudorandom scenarios with the Monte Carlo simulation method, in addition to the Net Present Value techniques, the Modified Internal Rate of Return, and the Profitability Index, all commonly used in financial investment projects. The results show that the estimated operational costs are equivalent to the actual ones, along with the evidence that the cost of fuel, the driver’s manpower, and tires are components that mainly increase the degree of financial risk for an investment project in road transportation of wood. In contrast, optimizing the amount of transported wood and maximizing wood transportation cost have a significant and positive correlation with the volume of transported wood and the average price of wood transportation, leading to a reduction in the degree of financial risk.

Physical agent noise can be considered one of the main disturbances that compromise the occupational health of self-propelled forest machine operators. We evaluated whether occupational noise levels emitted by self-propelled forest machines employed in the full tree system are in accordance with both the National Institute for Occupational Safety and Health and ISO 1999:2013 standards, while also proposing mitigating measures aimed at protecting the operators hearing. Seventeen operators, who performed wood harvesting operations in Eucalyptus forests in Brazil, were analyzed. Noise levels were collected in a daily shift of eight hours as recommended by the Acoustics – Determination of occupational noise exposure - Engineering method for full-day measurements (ISO 9612:2009). The standards adopted for the evaluation were the exposure action value of 80 dBA and the exposure limit of 85 dBA based on the National Institute for Occupational Safety and Health – NIOSH and on Acoustics – Estimation of noise-induced hearing loss (ISO 1999:2013) Directive 2003/10/EC. The operators were arranged in homogeneous groups according to the Acoustics recommendation – Determination of occupational noise exposure - Engineering method for full-day measurements (ISO 9612:2009), classified by the operations of felling, skidding of tree bundles and bucking. The results showed that 17 self-propelled forest machines exceeded the exposure action value of 80 dBA, of which 10 machines exceeded the exposure limit of 85 dBA. It was concluded that the levels of occupational noise emitted by self-propelled forest machines used in the full tree system are higher than those recommended by both standards, National Institute for Occupational Safety and Health and ISO 1999:2013. Therefore, the allocation of self-propelled forest machines to homogeneous groups allows inferring mitigation actions that protect operators' hearing. The correct use of hearing protectors during the daily workday provides hearing protection for operators in mechanized wood harvesting. Adoption of actions such as maintenance of cabin seals and mechanical components, breaks for fatigue relief, reduction of daily working hours and rotation of operators in different self-propelled forest machines can mitigate the damage to the occupational health of operators.

The operational productivity and costs of tree felling operations can be influenced by several factors, among which, the machine characteristics, slope class, the cutting area and the individual volume of the trees stand out. Thus, the main objective of the present study was to analyze the productivity and production cost for two feller-bunchers with different technical characteristics operating in a eucalyptus forest. The productivity was calculated from a time study and the factors analyzed were two feller-buncher models, two slope classes, and two cutting areas. The machine cost per scheduled hour was based on the methodology of the Food and Agriculture Organization of the United Nations. Analysis of the results showed that the felling and turn operational elements occupied the most time in the operational cycle of feller-bunchers. The machine cost per scheduled hour was USD 69.69 h⁻¹ for feller-buncher 1 and USD 102.03 h⁻¹ for feller-buncher 2. In conclusion, the distinct technical characteristics of feller-bunchers were found to influence the productivity and, consequently, the cost, of the felling operation during the harvesting of whole eucalyptus trees.

This study evaluated whether the organisational culture of the country causes a moderating effect on the relationship between motivational factors and knowledge sharing intention (KSI) from the perspective of Toyota managers in Japan and Brazil. The questionnaire applied to Toyota managers, in Brazil (n = 84) and Japan (n = 111) through online access. The data treatment applied structural equation modelling. The results revealed that Brazilian managers attributed higher mean values than the average values of Japanese managers. Analysis of the two samples revealed no significant differences in the structure of the structural equation model through the use of PLS-PM. While for the Brazilian sample only anticipated reciprocal relationship explained KSI, for the Japanese sample, the anticipated reciprocal relationship and sense of self-worth contributed to explaining KSI. Three interactions between the three moderation variables and the three independent variables were significant when analysing the sample of Brazilian managers.

The processing of Eucalyptus logs is a stage that follows the full tree system in mechanized forest harvesting, commonly performed by grapple saw. Therefore, this activity presents some associated uncertainties, especially regarding technical and silvicultural factors that can affect productivity and production costs. To get around this problem, Monte Carlo simulation can be applied, or rather a technique that allows to measure the probabilities of values from factors that are under conditions of uncertainties, to which probability distributions are attributed. The objective of this study was to apply the Monte Carlo method for determining the probabilistic technical-economical coefficients of log processing using two different grapple saw models. Field data were obtained from an area of forest planted with Eucalyptus, located in the State of São Paulo, Brazil. For the technical analysis, the time study protocol was applied by the method of continuous reading of the operational cycle elements, which resulted in production. As for the estimated cost of programmed hour, the applied methods were recommended by the Food and Agriculture Organization of the United Nations. The incorporation of the uncertainties was carried out by applying the Monte Carlo simulation method, by which 100,000 random values were generated. The results showed that the crane empty movement is the operational element that most impacts the total time for processing the logs; the variables that most influence the productivity are specific to each grapple saw model; the difference of USD 0.04 m3 in production costs was observed between processors with gripping area of 0.58 m2 and 0.85 m2. The Monte Carlo method proved to be an applicable tool for mechanized wood harvesting for presenting a range of probability of occurrences for the operational elements and for the production cost.