Anaerobic co-digestion technology is increasingly used to simultaneously treat solid and liquid organic waste to balance nutrient content, to reduce the negative effects of toxic compounds in the process, and to increase biogas yield. The aim of this study was to analyze the economic performance of co-digestion plants fed with agro-industrial wastes as a function of installed power, with a method of discounted cash flow. The study focused on Italian framework conditions concerning payment for electricity produced by anaerobic digestion (AD) plants as well as the production costs. The economic analysis was carried out using three different plant sizes: 100 kW, 500 kW, and 1000 kW, which are representative of biogas plants in Italy. The study showed that the improvement of the break-point is closely linked to the increase in corresponding plant size. Given the assumptions of the simulation, the payback for the 100 kW plant was nine years for both the all-inclusive tariff and the basic feed-in tariff (BFT). Regarding the 500 kW and 1000 kW plants, the payback periods were five and four years, respectively.

The production of energy from renewable sources, the diversification of the productive activities, and the development of photovoltaic technology and integrated systems have led to the development of solar greenhouses. The interest of the developers and designers is now to seek new approaches to combine the electricity and food production optimally. The interaction of factors as outside local climate, exposure, slope, soil, altitude, wind conditions, structural materials, or cultivated plant species, influences greatly the energy balance. This paper illustrates the comparison of optical and thermal behavior of a solar greenhouse and a similar glass greenhouse, devoted to the production of soil‐less tomatoes in three different Italian areas, with computational aspects and methods of the TRNSYS simulation. Values of climatic parameters are obtained as a responce for the feasibility of the cultivation under PV modules. The results show energy savings both for heating and cooling due to PV panels, adding a new reason for the realization of these systems.

Biodiesel is a renewable diesel fuel produced from fats and oils. Waste Vegetable Oil (WVO) is an important feedstock for biofuel production. WVOs availability as wastes from restaurants, workplace canteens and residential users and their utilization will reduce environmental pollution. In the present work, WVO has been transesterified in a pilot plant under different conditions. The assessment of the parameters affecting the biodiesel conversion factor has been investigated, namely catalyst type and concentration and alcohol concentration. In order to maximize the yield of the process and to obtain biodiesel with lower specific gravity, an optimization process has been carried out

Greenhouses crops in Italy are made by using prefabricated structures, leaving out the preliminary study of optical and thermal exchanges between the external environment and the greenhouse, dealing with heating and cooling and the effects of air conditioning needed for plant growth. This involves rather significant costs that directs the interest of designers, builders, and farmers in order to seek constructive solutions to optimize the system of such emissions. This work was done by building a model of gases using TRNSYS software, and these gases then have been checked for compliance. The model was constructed considering an example of a prefabricated greenhouse, located in central of Italy. Aspects of the structural components, and thermal and optical properties are analyzed in order to achieve a representation of reality.

The need to address climate change caused by greenhouse gas emissions attaches great importance to research aimed at using renewable energy. Geothermal energy is an interesting alternative concerning the production of energy for air conditioning of buildings (heating and cooling), through the use of geothermal heat pumps. In this work a model has been developed in order to simulate an air conditioning system with geothermal heat pump. A ground source heat pump (GSHP) uses the shallow ground as a source of heat, thus taking advantage of its seasonally moderate temperatures. GSHP must be coupled with geothermal exchangers. The model leads to design optimization of geothermal heat exchangers and to verify the operation of the geothermal plant.

In order to face the growing energy demands, renewable energy sources can provide an alternative to fossil fuels. Thus, low‐enthalpy geothermal plants may play a fundamental role in those areas—such as the Province of Viterbo—where shallow groundwater basins occur and conventional geothermal plants cannot be developed. This may lead to being fuelled by locally available sources. The aim of the present paper is to exploit the heat coming from a low‐enthalpy geothermal system. The experimental plant consists in a down‐hole heat exchanger for civil purposes and can supply thermal needs by district heating. An implementation in MATLAB environment is provided in order to develop a mathematical model. As a consequence, the amount of withdrawable heat can be successfully calculated.