Obstacle avoidance systems for autonomous driving vehicles have significant effects on driving safety. The performance of an obstacle avoidance system is affected by the obstacle avoidance path planning approach. To design an obstacle avoidance path planning method, firstly, by analyzing the obstacle avoidance behavior of a human driver, a safety model of obstacle avoidance is constructed. Then, based on the safety model, the artificial potential field method is improved and the repulsive field range of obstacles are rebuilt. Finally, based on the improved artificial potential field, a collision-free path for autonomous driving vehicles is generated. To verify the performance of the proposed algorithm, co-simulation and real vehicle tests are carried out. Results show that the generated path satisfies the constraints of roads, dynamics, and kinematics. The real time performance, effectiveness, and feasibility of the proposed path planning approach for obstacle avoidance scenarios are also verified.

Energy management strategies are one of the key factors affecting the working efficiency of electric vehicle energy power systems. At present, electric vehicles will develop real-time and efficient energy management strategies according to the topology of on-board energy power system to improve the driving performance of vehicles. In this paper, a new electromechanical flywheel hybrid system is studied. Firstly, the characteristics of the topological scheme of the electromechanical flywheel hybrid system are analyzed, and the working modes are designed. Secondly, in order to improve the efficiency of vehicles’ energy utilization and ensure the real-time performance of the management strategy, an energy management strategy based on fuzzy rules is designed with the flywheel’s state of energy (SOE) as the key reference parameter. Then, considering the directional stability in the braking process, the braking force distribution strategy between the front axle and the rear axle is designed. In order to improve the braking energy recovery efficiency, the secondary distribution strategy consisting of a mechanical braking force and regenerative braking force on the front and rear axles is designed. Finally, the bench test of a electromechanical flywheel hybrid system is carried out. Experiments show that compared with the original dual-motor four-wheel drive scheme, the electromechanical flywheel hybrid four-wheel drive system scheme developed in this paper can reduce the current variation range of lithium batteries by 43.16%, increase the average efficiency by 1.04%, and increase the braking energy recovery rate by 40.61% under the Japan urban cycle conditions. In addition, taking advantage of the energy and power regulation advantages of the electromechanical flywheel device, the power consumption of the lithium battery is reduced by 1.82% under cycling conditions.

Environment perception is the foundation of the intelligent driving system and is a prerequisite for achieving path planning and vehicle control. Among them, obstacle detection is the key to environment perception. In order to solve the problems of difficult-to-distinguish adjacent obstacles and easy-to-split distant obstacles in the traditional obstacle detection algorithm, this study firstly designed a 3D point cloud data filtering algorithm, completed the point cloud data removal of vehicle body points and noise points, and designed the point cloud down-sampling method. Then a ground segmentation method based on the Ray Ground Filter algorithm was designed to solve the under-segmentation problem in ground segmentation, while ensuring real time. Furthermore, an improved DBSCAN (Density-Based Spatial Clustering of Application with Noise) clustering algorithm was proposed, and the L-shaped fitting method was used to complete the 3D bounding box fitting of the point cloud, thus solving the problems that it is difficult to distinguish adjacent obstacles at close distances caused by the fixed parameter thresholds and it is easy for obstacles at long distances to split into multiple obstacles; thus, the real-time performance of the algorithm was improved. Finally, a real vehicle test was conducted, and the test results show that the proposed obstacle detection algorithm in this paper has improved the accuracy by 6.1% and the real-time performance by 13.2% compared with the traditional algorithm.

The optimal design of a super highspeed flywheel rotor could improve flywheel battery energy density. The improvement of flywheel battery energy density could enhance the performance of the flywheel lithium battery composite energy storage system. However, there are still many problems in the structure, material and flywheel winding of super highspeed flywheels. Therefore, in this paper, electric flywheel energy and power density parameters are designed based on CPE (Continuous Power Energy) function and vehicle dynamics. Then, according to the design index requirements, the structure, size and material of the electric flywheel rotor are designed. Furthermore, the numerical analysis model of stress and displacement of multi-ring interference fit flywheel rotor under plane stress state is established. On this basis, the influence laws of flywheel rotor wheel flange numbers and interlaminar interference on stress distribution of flywheel rotor are analyzed, and the assembly form of wheel flange is determined. Finally, the stress check of the flywheel rotor is completed. The results show that the super highspeed flywheel rotor designed in this paper meets vehicle dynamics requirements in terms of energy storage and power. In terms of strength, it meets the design requirements of static assembly stress and dynamic stress at maximum speed.

To improve the tracking accuracy and the adaptability of intelligent vehicles in various road conditions, an adaptive model predictive controller combining reinforcement learning is proposed in this paper. Firstly, to solve the problem of control accuracy decline caused by a fixed prediction time domain, a low-computational-cost adaptive prediction horizon strategy based on a two-dimensional Gaussian function is designed to realize the real-time adjustment of prediction time domain change with vehicle speed and road curvature. Secondly, to address the problem of tracking stability reduction under complex road conditions, the Deep Q-Network (DQN) algorithm is used to adjust the weight matrix of the Model Predictive Control (MPC) algorithm; then, the convergence speed and control effectiveness of the tracking controller are improved. Finally, hardware-in-the-loop tests and real vehicle tests are conducted. The results show that the proposed adaptive predictive horizon controller (DQN-AP-MPC) solves the problem of poor control performance caused by fixed predictive time domain and fixed weight matrix values, significantly improving the tracking accuracy of intelligent vehicles under different road conditions. Especially under variable curvature and high-speed conditions, the proposed controller reduces the maximum lateral error by 76.81% compared to the unimproved MPC controller, and reduces the average absolute error by 64.44%. The proposed controller has a faster convergence speed and better trajectory tracking performance when tested on variable curvature road conditions and double lane roads.