In order to improve the energy efficiency (EE) performance of cooperative networks, this study combines non-orthogonal multiple access (NOMA) with simultaneous wireless information and power transfer (SWIPT) technologies to construct a cooperative relay network composed of one base station (BS), multiple near users, and one far user. Based on the network characteristics, a time-division resource allocation rule is proposed, and EE formulas regarding direct-link mode and cooperative mode are derived. Considering user selection and decoding performance, to obtain the optimal EE, this study utilizes a DinkelBach iterative algorithm based on the golden section (GS-DinkelBach) to solve the EE optimization problem, which is affected by power transmitted from the BS, achievable rates under three communication links, and quality of service (QoS) constraints of users. The simulation results show that the GS-DinkelBach algorithm can obtain precise EE gains with low computational complexity. Compared with the traditional NOMA–SWIPT direct-link network model and the relay network model, the optimal EE of the established network model could be increased by 0.54 dB and 1.66 dB, respectively.
To relieve the impact caused by different arrival times of multiple users in the uplink MIMO-SCMA system, a grouped multiuser transmission model, according to different delays and its corresponding detection scheme, is proposed in this paper. Assuming perfect synchronization in one group, a message-passing algorithm based on serial propagation (SP-MPA) is proposed to reduce the bit error rate (BER), which could transfer the updated information to the next symbol as its initial probability. Furthermore, with a more practical case, the partial Gaussian approximation method (PGA) is designed to decrease the interference resulting from the imperfect synchronization in one group. As the result, the computing complexity of the proposed PGA method could be decreased by at least 20% compared with SP-MPA and the BER could be improved by about 10%.