In this paper, the intermittent control is proposed for switched reluctance machine drive to both increase the efficiency and decrease the cost of the traction system for low-cost electric vehicles. With the purpose of maintaining the average machine torque required by the load, the intermittent control imposes a higher phase torque during a shorter time. The simulation and experimental results achieved with two different switched reluctance machines show that the intermittent control increases the system efficiency by reducing the converter losses and the core losses. Additionally, the intermittent has three different strategies solving different criteria of an automotive application: efficiency, machine vibration and torque pulsation. It can also be easily applied for any switched reluctance machines using average-torque-control-based methods.

Nowadays, in aeronautical applications, rigorous reliability requirements are high constraints for embedded systems. Therefore, material redundancy is adopted to ensure safety whatever operation conditions may be. In the design of a direct-drive actuator for a specific application, redundancy is taken into account using a compound of four three-phase permanent magnet synchronous machines (PMSM). Each two electric machines are mounted in series sharing the same rotor with a common through shaft. The stators of each two electric machines are designed and manufactured as a six-phase machine. For each machine, power supply, sensors, and control loops are independent. In the characterization of the designed actuator and in the validation of its specific control in healthy operation mode and in faulty operation mode, taking into account the force fight phenomenon between the motor lanes, a specific test bench is developed. The aim of this paper is to highlight this phenomenon in faulty operation mode and to develop an easily implementable monitoring architecture, in order to eliminate it. Finally, with the proposed approach of monitoring, the force fight phenomenon is eliminated in faulty operation mode keeping the same performance as in healthy operation mode.