The development of health indicators (HI) of diagnostic and prognostic potential from generally uninformative raw sensor data is both a challenge and an essential feature for data-driven diagnostics and prognostics of composite structures. In this study, new damage-sensitive features, developed from strains acquired with Fiber Bragg Grating (FBG) and acoustic emission (AE) data, were investigated for their suitability as HIs. Two original fatigue test campaigns (constant and variable amplitude) were conducted on single-stringer composite panels using appropriate sensors. After an initial damage introduction in the form of either impact damage or artificial disbond, the panels were subjected to constant and variable amplitude compression–compression fatigue tests. Strain sensing using FBGs and AE was employed to monitor the damage growth, which was further verified by phased array ultrasound. Several FBGs were incorporated in special SMARTapesTM, which were bonded along the stiffener’s feet to measure the strain field, whereas the AE sensors were strategically placed on the panels’ skin to record the acoustic emission activity. HIs were developed from FBG and AE raw data with promising behaviors for health monitoring of composite structures during service. A correlation with actual damage was attempted by leveraging the measurements from a phased array camera at several time instances throughout the experiments. The developed HIs displayed highly monotonic behaviors while damage accumulated on the composite panel, with moderate prognosability.
In this study, a multi-level Structural Health Monitoring methodology for stiffened composite panels is introduced. A digital twin (DT), that is, a three-dimensional finite element (FE) model, representing the pristine state baseline of the test article, is developed and verified for compressive loading in the post-buckling regime. The detailed FE model is utilized to train a surrogate model with respect to exogenous input, that is, axial load magnitude. The surrogate assists the DT concept that would allow prediction of the load acting on the structure based on an influx of strain data, acquired from fiber Bragg grating sensors permanently attached along the stringer feet. For this purpose, we leverage on the observation that remote from the damage, the strain field remains virtually unaltered with regard to the pristine state. The load is estimated by a sensor placed far from the damage whilst the diagnostic actions are performed by exploiting measurements from the remaining sensing locations. A health indicator, which compares the experimentally received strains with those from the surrogate representing the pristine state, is utilized to (1) detect, (2) localize, and (3) characterize the damage. As damage, we consider either skin-to-stringer disbond or initial impact damage propagation as well as overall stiffness degradation during thousands or millions of fatigue cycles. The sensors that have detected a disbond are dedicated to evaluating the potential propagation of it, while the remaining sensors evaluate the overall stiffness degradation. The proposed methodology is tested for one artificially disbonded and two impacted single-stringer panels subjected to block loading compression-compression fatigue.
Structural health monitoring using strain data faces a critical challenge: decoupling subtle structural degradation signatures from the dominant influence of operational loads. This paper introduces a novel methodology to address this by synergistically combining a custom health indicator (HI) with graph neural networks (GNNs). The proposed HI, derived from the cumulative absolute first derivative of strain over time, effectively isolates load-independent features indicative of damage progression. These features serve as input to our proposed GENConv with Edge Attributes (GENEA) model, a GNN that explicitly models the spatially distributed sensors as an interconnected network, leveraging spatial interdependencies and edge attribute information within the strain field to enhance damage assessment. This integrated approach enables accurate structural stiffness reduction estimation (diagnostics) and remaining useful life (RUL) prediction (prognostics). Applied to strain data from fatigue tests on representative aeronautical composite panels, the methodology is rigorously evaluated using Leave-One-Panel-Out cross-validation. The framework shows promising performance on unseen test data, although challenges in generalizing to out-of-distribution specimens were also identified, highlighting the importance of a diverse training set for real-world applicability. Experimental results confirm the framework’s superiority. The proposed GENEA model significantly outperforms both a fundamental multi-layer perceptron and a spatially aware convolutional neural network baseline, and successfully generalizes to an unseen panel with a different sensor count. This validates the benefits of using a tailored GNN framework to learn robust, geometrically invariant patterns from load-decoupled spatial strain data.
Prognostics and health management (PHM) is becoming increasingly important as engineering structures and systems grow more complex. Many of these systems lack accurate physical models to describe their degradation, especially in unpredictable scenarios. To meet safety regulations, robust prognostic models are needed to transform sensor data into reliable predictions about a system’s remaining useful life (RUL). This study presents the adaptive hidden semi-Markov model (AHSMM), a novel probabilistic approach that enhances RUL prediction accuracy, uncertainty quantification (UQ), and reliability assessment compared to a long short-term memory (LSTM) model. A key contribution is an in-house experimental campaign involving glass fiber-reinforced polymer specimens subjected to fatigue loading and multiple impact events at different locations and time intervals. Unlike traditional models that rely on data from similar damage histories, the AHSMM is trained exclusively on unimpacted specimens and tested on multiply impacted ones, showcasing its adaptability to previously unseen conditions. The study also introduces a new prognostic performance measure tailored to AHSMM and develops a conditional reliability analysis for both AHSMM and LSTM predictions. Results demonstrate that AHSMM consistently outperforms LSTM across all evaluation metrics. It achieves a 24% lower RMSE over the full lifetime and superior UQ, with an average coverage of 0.79 compared to 0.17 for LSTM. Conditional reliability analysis further shows that AHSMM provides more accurate and stable reliability estimates as data accumulates. By capturing the degradation process and adapting to evolving conditions, AHSMM strengthens prognostic robustness. This study highlights the need for robust PHM models that can handle real-world uncertainties and contribute to advancements in the aerospace, automotive, and defense industries.