The testing of the standard and modified SST models of the transfer of shear stresses was carried out on an example of calculating the heat transfer with an intense detached flow around a conical dimple with a slope angle of on the heated wall of a narrow channel. It was shown that the standard turbulence model by Menter SST (MSST) of 2003, widely used in the packages Fluent, CFX, StarCCM+, etc., significantly underestimated the intensity of the return flow. A correction of this model was presented that took into account the influence of the curvature of streamlines within the framework of the Rodi-Leshziner-Isaev (RLI) approach for spatial separated flows. It was found that the predictions for the RLI MSST 2003 were close to the predictions for the original standard MSST 1993, in which the eddy viscosity was calculated using the vorticity modulus. At the same time, the predictions based on the modified one, following Smirnov-Menter (SM) MSST 2003, included in the ANSYS model catalog did not differ too much from the standard MSST 2003. The preference of the MSST modified within the RLI 2003 for calculating the heat transfer in intense separated flows was substantiated.
The present article is devoted to the safe operation of oil platforms in difficult ice conditions. To ensure the safety of offshore facilities, it is essential to deviate a drifting iceberg’s trajectory that may lead to an emergency with the help of available technological means. To reliably predict the behaviour of icebergs when they are towed or deviate from their previous course, it is necessary to determine the hydrodynamic and aerodynamic characteristics of the iceberg. This paper proposes a simplified method for determining the hydrodynamic and aerodynamic characteristics of an iceberg. Key concept of the proposed approach include replacing the iceberg waterline with an equivalent ellipse. This diminishes and then shifts the hydrodynamic characteristic determination of the iceberg’s underwater section to determining the resistance of a three axial ellipsoid or elliptical cylinder depending on the shape of the iceberg’s underwater section. The hydrodynamic characteristics of several real icebergs determined by the proposed method are compared with the results of their numerical simulation using the CFD approach. The proposed approach provides a quick assessment of the hydrodynamic characteristics of icebergs when information on its underwater section is unreliable, inconsistent or absent.
Modeling the vortex intensification of turbulent heat transfer in narrow engine ducts using single-row dimples was carried out within the framework of multi-block computing technologies implemented in a special VP2/3 package. The cases of a rectangular section with the placement of vortex generators—single-row packages of oval and spherical dimples on the initial hydrodynamic section and the section of the stabilized flow are excluded. The connection between the generated vortex structures and the predominant increase in heat transfer compared to the increase in hydraulic losses for various dimple layouts has been established: zigzag, ladder, and centers shifted and in a longitudinal-transverse order. The superiority in heat removal from the thickness with inclined oval dimples is shown—1.23 times compared to spherical ones with a decay in hydraulic resistance by 1.16 times.
The applicability of the solution of the unsteady Reynolds-averaged Navier–Stokes equations (URANS) for the numerical simulation of the periodic quasi-switching regime of vortex generation and heat transfer in a deep conical dimple with a slope angle of on the wall of a narrow channel is substantiated. To calculate the turbulent regime, the model of shear stress transfer by Menter 2003, modified taking into account the influence of the curvature of streamlines within the framework of the Rodi-Leshziner-Isaev approach, is used. At Reynolds number , the oscillation period of the transverse and longitudinal forces , as well as the total heat transfer to the control section of the heated channel wall with a dimple, is set equal to 60, which corresponds to the Strouhal number . Computer visualization of swirling jet-vortex flows demonstrates focus-type sources on the side faces of the dimple. In the self-oscillating mode, a two-cell vortex system is formed with different intensities at the oscillation period . Periodic changes in friction, Nusselt numbers and temperature are recorded in the longitudinal and transverse median sections of the dimple and reflect the oscillations of the vortex structure from left to right and from right to left. The formation of a fan jet is shown, which oscillates relative to the plane of longitudinal symmetry, causing a redistribution of power and thermal loads.
A separated flow in a narrow channel with a conical dimple at the wall with an incline angle of θ is calculated based on the solution to the unsteady Reynolds-averaged Navier–Stokes equations (URANS) closed using the modified shear stress transport (SST) model. It is noted that a sharp transition from the periodic mode with two alternately changing vortices in dimples close to cylindrical shape (θ = 10°–22.5°) to modes with periodic low-frequency vibrations of inclined single-vortex structures at moderate angles θ (30°–37.5°) and to modes with steady vortex structures at angles θ larger than 45° is observed. The relative hydraulic losses at the channel segment with the dimple remain at a level of 1.23–1.24 as θ increases to θ = 45° and, then, rapidly decrease by almost 1.5 times to 1.16 at θ = 60°.