The performance of an asynchronous transfer mode (ATM) multiplexer whose input consists of the superposition of a multiplicity of homogeneous on-off sources modeled by a two-state Markovian process is studied. The approach is based on the approximation of the actual input process by means of a suitably chosen two-state Markov modulated Poisson process (MMPP), as a simple and effective choice for the representation of superposition arrival streams. To evaluate the cell loss performance, a new matching procedure that leads to accurate results compared to simulation is developed. The application limits of the proposed method are also discussed. The outstanding physical meaning of this procedure permits a deep insight into the multiplexer performance behavior as the source parameters and the multiplexer buffer size are varied

In this paper we analyze the challenging problem of energy saving in IP networks. A novel network-level strategy based on a modification of current link-state routing protocols, such as OSPF, is proposed; according to this strategy, IP routers are able to power off some network links during low traffic periods. The proposed solution is a three-phases algorithm: in the first phase some routers are elected as "exporter" of their own Shortest Path Trees (SPTs); in the second one the neighbors of these routers perform a modified Dijkstra algorithm to detect links to power off; in the last one new network paths on a modified network topology are computed. Performance study shows that, in an actual IP network, even more than the 60% of links can be switched off.

We propose an architecture for a bufferless packet optical switch employing the wavelength dimension for contention resolution. The optical packet switch is equipped with tunable wavelength converters shared among the input lines. An analytical model Is proposed in order to determine the number of converters needed to satisfy prefixed packet loss probability constraints. This analytical model very accurately fits with simulations results. A sensitivity analysis of the required number of converters as a function of the main system parameters (number of input and output lines, number of wavelengths, ...) and traffic parameters has been carried out. Making use of the introduced dimensioning procedure we have observed that the proposed architecture allows a saving in terms of employed number of converters with respect to the other architectures proposed in literature. Such a saving can reach about 95% of the number of converters.

This article reports a review of the most significant issues related to network architectures and technologies which will enable the realization of future optical Internet networks. The design of such networks has to take into consideration the peculiar characteristics of Internet traffic. Several architectures have been proposed to provide optical networking solutions, based on wavelength-division multiplexing and compatible with the IP world. These architectures are presented briefly, and the main advantages and drawbacks are discussed. Furthermore, advanced network architectures are reported. In particular, two network paradigms are illustrated and discussed: the optical transparent packet network and optical burst switching. Finally, the key technologies are illustrated

We study the optical burst switching (OBS) paradigm for the support of the TCP flows in an all optical network (AON). We analyze the TCP send rate, i.e. the amount of data sent per time unit, taking into account of: (i) the burst assembly mechanism, called burstification process; (ii) the burst loss events inside the OBS network. The goals of the paper are to investigate the effect of the variation of the burstification period and to derive some general guidelines about the dimensioning of the burstification period. With respect to the case in which any assembly mechanism is missing, the results show that an accurate dimensioning of the burstification period yields negligible penalties with regard to the low speed sources and significant benefits with regard to the high speed sources.

Today, backbone networks of telecom operators deploy a large number of devices and links. This is mainly due to both redundancy purposes for network service reliability and resource overdimensioning for maintaining quality of service during rush hours. Unfortunately, current network devices do not have power management primitives, and have constant energy consumption independent of their actual workloads. Starting from these considerations, we propose a viable approach to introduce and support standby modes in backbone network devices. This approach can be effectively used to almost halve the energy requirements of the whole telecom core network. Our main idea consists of periodically reconfiguring nodes and links to meet incoming traffic volumes and operational constraints of real-world networks, such as reliability, stability, quality of service, and reconvergence times. To this purpose, the approach we propose directly exploits the main features of both backbone device architectures and the network protocol stack.