The thermal treatment method was employed to prepare nickel-cobalt oxide (NiO/Co3O4) nanoparticles. This method was attempted to achieve the higher homogeneity of the final product. Specimens of nickel-cobalt oxide were characterized by various experimental techniques, including X-ray diffraction (XRD), transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FTIR). X-ray diffraction results showed that there was no crystallinity in the predecessor, and it still had the amorphous phase. The formations of the crystalline phases of the nickel-cobalt oxide nanoparticles started from 350–500 °C, and the final products had different crystallite sizes ranging from 11–35 nm. Furthermore, the variation of DC conductivity (σdc), impedance, tangent loss (tgδ) and dielectric constant (ε′) of the calcined specimens with frequency in the range of 102–106 Hz was investigated. σdc showed a value of 1.9 × 10−6 S/m, 1.3 × 10−6 S/m and 1.6 × 10−6 S/m for the specimens calcined at 350, 400 and 450 °C, respectively. Additionally, a decrease in tgδ values with an increase in temperature was observed. Finally, the formed nanoparticles exhibited ferromagnetic behaviors, which were confirmed by using a vibrating sample magnetometer (VSM).
Three-dimensional ZnO multipods are successfully synthesized on functional substrates using the vapor transport method in a quartz tube. The functional surfaces, which include two different distributions of Ag nanoparticles and a layer of commercial Ag nanowires, are coated onto silicon substrates before the growth of ZnO nanostructures. The structures and morphologies of the ZnO/Ag heterostructures are investigated using X-ray diffraction and field emission scanning electron microscopy. The sizes and shapes of the Ag particles affect the growth rates and initial nucleations of the ZnO structures, resulting in different numbers and shapes of multipods. They also influence the orientation and growth quality of the rods. The optical properties are studied by photoluminescence, UV-vis, and Raman spectroscopy. The results indicate that the surface plasmon resonance strongly depends on the sizes and shapes of the Ag particles.
1 November 2021 in Journal of Alloys and Compounds