This document presents an assisted operation system of a robotic arm for positioning near an explosive device selected by the user through the visualization of the cameras on the screen. Two non-converging cameras mounted on the robotic arm in camera-in-hand configuration provide the three-dimensional (3D) coordinates of the object being tracked, using a 3D reconstruction technique with the help of the continuously adaptive mean shift (CAMSHIFT) algorithm for object tracking and feature matching. The inverse kinematics of the robot is implemented to locate the end effector close to the explosive so that the operator can perform the operation of grabbing the grenade more easily. Inverse kinematics is implemented in its geometric form, thus reducing the computational load. Tests conducted with various explosive devices verified the effectiveness of the system in locating the robotic arm in the desired position.

A global human–robot interface that meets the needs of Technical Explosive Ordnance Disposal Specialists (TEDAX) for the manipulation of a robotic arm is of utmost importance to make the task of handling explosives safer, more intuitive and also provide high usability and efficiency. This paper aims to evaluate the performance of a multimodal system for a robotic arm that is based on Natural User Interface (NUI) and Graphical User Interface (GUI). The mentioned interfaces are compared to determine the best configuration for the control of the robotic arm in Explosive Ordnance Disposal (EOD) applications and to improve the user experience of TEDAX agents. Tests were conducted with the support of police agents Explosive Ordnance Disposal Unit-Arequipa (UDEX-AQP), who evaluated the developed interfaces to find a more intuitive system that generates the least stress load to the operator, resulting that our proposed multimodal interface presents better results compared to traditional interfaces. The evaluation of the laboratory experiences was based on measuring the workload and usability of each interface evaluated.

Explosive ordnance disposal (EOD) operations are hazardous due to the volatile and sensitive nature of these devices. EOD robots have improved these tasks, but their high cost limits accessibility for security institutions that do not have sufficient funds. This article presents the design, implementation, and validation of a low-cost EOD robot named JVC-02, specifically designed for use in explosive hazardous environments to safeguard the safety of police officers of the Explosives Disposal Unit (UDEX) of Arequipa, Peru. To achieve this goal, the essential requirements for this type of robot were compiled, referencing the capabilities of Rescue Robots from RoboCup. Additionally, the Quality Function Deployment (QFD) methodology was used to identify the needs and requirements of UDEX police officers. Based on this information, a modular approach to robot design was developed, utilizing commercial off-the-shelf components to facilitate maintenance and repair. The JVC-02 was integrated with a 5-DoF manipulator and a two-finger mechanical gripper to perform dexterity tasks, along with a tracked locomotion mechanism, which enables effective movement, and a three-camera vision system to facilitate exploration tasks. Finally, field tests were conducted in real scenarios to evaluate and experimentally validate the capabilities of the JVC-02 robot, assessing its mobility, dexterity, and exploration skills. Additionally, real EOD missions were carried out in which UDEX agents intervened and controlled the robot. The results demonstrate that the JVC-02 robot possesses strong capabilities for real EOD applications, excelling in intuitive operation, low cost, and ease of maintenance.

The acquisition of ECG signals offers physicians and specialists a very important tool in the diagnosis of cardiovascular diseases. However, very often these signals are affected by noise from various sources, including noise generated by movement during physical activity. This type of noise is known as Motion Artifact (MA) which changes the waveform of the signal, leading to erroneous readings. The elimination of this noise is performed by different filtering techniques, where the adaptive filtering using the LMS (least mean squares) algorithm stands out. The objective of this article is to determine which algorithms best deal with motion artifacts, taking into account the use of instruments or wearable equipment, in different conditions of physical activity. A comparison between different algorithms derived from LMS (NLMS, PNLMS and IPNLM) used in adaptive filtering is carried out using indicators such as: Pearson's Correlation Coefficient, Signal to Noise Ratio (SNR) and Mean Squared Error (MSE) as metrics to evaluate them. For this purpose, the mHealth database was used, which contains ECG signals taken during moderate to medium intensity physical activities. The results show that filtering by IPNLMS as well as PNLMS offers an improvement both visually and in terms of SNR, Pearson, and MSE indicators.