The tilting-pad journal bearing in the cooling system of the nuclear power plant is equipped below the ground and vertically positioned to accomplish its function for water transfer. Usually, the loading conditions are relatively stable since the required water volume almost remains the same level during the operation, but the loading direction cannot be known in advance. Furthermore, the bearing is designed with several separate pads, which allows the bearing to support the loading flexibly. The safety application of nuclear energy requires the bearing to have a reliable ability to maintain the rotating motion of gear sets. This study develops a numerical model to simulate the mixed thermo-elastohydrodynamic lubrication for the tilting-pad journal bearing in the nuclear plant. The elastic and thermal fields are properly determined, and the induced displacement is taken into account for an accurate description of film thickness. The asperity contact due to misaligned journal is well evaluated in the local area where the lubrication film cannot separate the surfaces. A parametric study is undertaken in detail to reveal the aspects that influence bearing lubrication. The conclusions potentially provide fundamentals for further lubrication optimization of the bearing system.

The swash-plate axial piston pump is one of the most widely used pumps due to its simplicity and compactness in structure. In such a pump, the piston-cylinder system plays a crucial role, with its lubrication characteristics greatly affecting the overall pumping performance. A new numerical approach is proposed in this study for modeling mixed lubricated piston-cylinder interfaces of variable lengths in swash-plate axial piston pumps in the framework of multibody dynamics. The approach couples the hydrodynamic mixed lubrication model of the piston-cylinder interface with the multibody dynamics model of the piston pump. The lubrication model is established with a transient average Reynolds equation considering asperity contacts and is solved with the finite element method to derive the hydrodynamic forces of the lubricated pair, while the multibody dynamics model is established with Lagrangian formalism by considering hydrodynamic forces as external forces. Results for piston-cylinder interfaces of variable lengths in swash-plate axial piston pumps are presented, and the impacts of cylinder length and the tilt angle of the swash plate on the tribological performances of the interface are discussed. The results indicate that increasing the cylinder length can improve the stability and wear resistance of the piston, but it can exacerbate the frictional power loss. Moreover, although enlarging the tilt angle of the swash plate can effectively increase pump displacement, it can easily lead to serious friction, wear, and leakage problems. Consequently, the tilt angle of the swash plate should be carefully selected in practical applications.

The tribo-dynamics performance of the piston–cylinder system is affected by multiple physical fields. The current work presents a novel multiphysics coupling method to model and analyze the lubricated piston skirt–cylinder interface considering the cylinder liner vibration. This method is implemented by coupling multibody dynamics of the crank-connecting rod–piston–cylinder system, the heat transfer of the cylinder and piston, hydrodynamics lubrication on the skirt–cylinder interface, vibration of the cylinder liner, and thermal as well as elastic deformation in the piston–cylinder system together with rheological characteristics of lubricating oil. The proposed method is adopted into a four-stroke gasoline engine to predict its dynamics and tribological characteristics, with the purpose of revealing the influence of cylinder liner vibration on the tribo-dynamics implementation of the piston–cylinder system. The results indicate that increasing the stiffness and damping coefficient of the cylinder is beneficial to suppress the vibration of the system, but it has little effect on the tribological characteristics of the piston skirt–cylinder interface.

Active vibration control (AVC) can solve many vibration problems. However, structural vibration in underwater vehicles often involves other factors such as complex excitation and path coupling, etc. At present, the traditional algorithm (e.g., multi Filtered-x Least Mean Square, M-FxLMS) usually cannot effectively process the multi-frequency excitation and the coupling effects of the multi-secondary path, which will affect its convergence and stability to a certain extent. Consequently, a novel strategy is presented in this paper, namely, the wavelet packet transformation decentralized decoupling M-FxLMS algorithm (WPTDDM-FxLMS), which can solve the structural vibration problems mentioned above. The multi-frequency control is converted into a single-frequency line spectrum control, and the feedback compensation factor is introduced in the identification of the secondary path, both of which can simplify the multi-path control system to the parallel single-path systems. Furthermore, the WPTDDM-FxLMS algorithm is applied to the AVC in a multi-input and multi-output system (MIMO) vibration platform. Finally, the simulation and experiments show that the wavelet packet can decompose the multi-frequency excitation into a line spectrum signal, and the improvement of the decentralized decoupling and the variable step-size can effectively reduce the computation amount and increase the convergence speed and accuracy. Overall, the novel algorithm is significant for multi-path coupling vibration control. It will have certain engineering application value in underwater vehicles.

A heterostructure film composed of graphene and h-BN has superlubricity and long-term anti-corrosion performance, enabling its potential applications as low-friction and corrosion-resistant coatings, especially in marine environments. However, the grain boundaries (GBs) and point defects formed during the preparation process may significantly affect the performance of the film. In this study, the tribological properties and wear mechanism of heterostructure films with different GB misorientation angles were studied with the molecular dynamics method. The results show that the high-energy atoms generated by strain-induced hillocks along the GBs can lead to stress concentration, thus deteriorating the wear resistance of the heterostructure film. Furthermore, point defects occurring on high-energy atoms can significantly alleviate the stress concentration, which is conducive to improving the wear resistance of the film. This study sheds light on improving the tribological characteristics of a graphene/h-BN heterostructure coating by properly controlling its microstructure.