sanggyu choi

Mr. sanggyu choi

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 July 2019 in Metals
Verified
Journal Article
Open access
PDF file
SCsanggyu choi
sanggyu choi
IHIn-Sung Hwang
In-Sung Hwang
Young-Min KimYoung-Min Kim
Young-Min Kim
BKBongyong Kang
Bongyong Kang
MKMunjin Kang
Munjin Kang
The quality of the resistance spot weld is predicted qualitatively using information from the weld’s external apparent image. The predicting tool used for weld qualities was a convolution neural network (CNN) algorithm with excellent performance in pattern recognition. A heat trace image of the weld surface was used as information on the external apparent image of welds. The materials used in the experiment were advanced high strength steel (AHSS) with 980 MPa strength, and uncoated cold-rolled (CR) steel sheets and galvannealed (GA) steel sheets were used. The quantitatively predicted weld quality information contained tensile shear strength, nugget diameter, fracture mode of welds, and expulsion occurrence. The predicted performance of the verification step of the model determined through the learning process was as follows; the predicted error rate for tensile shear strength and nugget diameter were 2.2% and 2.6%, respectively. And the predicted accuracy on fracture mode and expulsion occurrence was 100%.

18 October 2025 in Materials Science in Semiconductor Processing
Verified
Journal Article
Open access
SCsanggyu choi
sanggyu choi
SKSangwook Kim
Sangwook Kim
JLJinkwan Lee
Jinkwan Lee
KKKeun-Soo Kim
Keun-Soo Kim
SHSoongkeun Hyun
Soongkeun Hyun

Verified
Journal Article
Open access
PDF file
SCsanggyu choi
sanggyu choi
SKSangwook Kim
Sangwook Kim
JLJinkwan Lee
Jinkwan Lee
KKKeun-Soo Kim
Keun-Soo Kim
Sk HyunSk Hyun
Sk Hyun
The effects of processing conditions and holding time on the direct bonding (DBC) of lotus-type porous copper to alumina substrates were systematically investigated. The evolution of copper morphology and the resulting shear strength were evaluated under varying pressures (0.3–0.6 Torr) and bonding durations (5–160 min) at a fixed bonding temperature. It was found that pressure within the tested range exerted a negligible influence on joint quality, as direct bonding occurred consistently. In contrast, holding time was found to be a critical factor: a duration of 10 min yielded optimal bonding with high shear strength while preserving the porous structure, whereas shorter times led to incomplete bonding, and longer times caused structural collapse due to liquid-phase flow. The oxidation behavior, governed by parabolic growth kinetics, was identified as the primary mechanism controlling morphological evolution. These findings provide practical guidance for optimizing DBC bonding of porous copper in power semiconductor applications, balancing joint strength and structural integrity.

3 October 2025 in Metals
Verified
Journal Article
Open access
PDF file
SCsanggyu choi
sanggyu choi
SKSangwook Kim
Sangwook Kim
JLJinkwan Lee
Jinkwan Lee
KKKeun-Soo Kim
Keun-Soo Kim
Sk HyunSk Hyun
Sk Hyun
This study investigates the shear strength of lotus-type unidirectional porous copper bonded to alumina substrates using the Direct Bonded Copper (DBC) process. Porous copper specimens with various porosities (38.7–50.9%) and pore sizes (150–800 μm) were fabricated and joined to alumina discs. Shear testing revealed that both porosity and pore size significantly affect the interfacial strength. While higher porosity led to reduced shear strength, larger pore sizes enhanced the maximum shear strength owing to increased local contact areas and crack coalescence in the alumina substrate. Fractographic analysis using optical microscopy and SEM-EDS confirmed that failure mainly occurred in the alumina, with local fracture associated with pore distribution and size. To improve strength prediction, a modified model was proposed, reducing the error from 12.3% to 7.5% and increasing the coefficient of determination (R2) from 0.43 to 0.74. These findings highlight the necessity of considering both porosity and pore size when predicting the shear strength of porous copper/alumina DBC joints, and they provide important insights for optimizing metal structures in metal–ceramic bonding for high-performance applications.

20 November 2025 in Materials Science in Semiconductor Processing
Verified
Journal Article
Open access
SCsanggyu choi
sanggyu choi
SKSangwook Kim
Sangwook Kim
JLJinkwan Lee
Jinkwan Lee
KKKeun-Soo Kim
Keun-Soo Kim
SHSoongkeun Hyun
Soongkeun Hyun