Conventional fossil fuels such as gasoline or diesel should be substituted in the future by environmentally-friendly alternatives in order to reduce emissions in the transport sector and thus mitigate global warming. In this regard, iso-butanol is very promising as its chemical and physical properties are very similar to those of gasoline. Therefore, ongoing research deals with the development of catalytically-supported synthesis routes to iso-butanol, starting from renewably-generated methanol. This research has already revealed that the dehydrogenation of ethanol plays an important role in the reaction sequence from methanol to iso-butanol. To improve the fundamental understanding of the ethanol dehydrogenation step, the Temporal Analysis of Products (TAP) methodology was applied to illuminate that the catalysts used, Pt/C, Ir/C and Cu/C, are very active in ethanol adsorption. H2 and acetaldehyde are formed on the catalyst surfaces, with the latter quickly decomposing into CO and CH4 under the given reaction conditions. Based on the TAP results, this paper proposes a reaction scheme for ethanol dehydrogenation and acetaldehyde decomposition on the respective catalysts. The samples are characterized by means of N2 sorption and Scanning Transmission Electron Microscopy (STEM).
1 June 2021 in Journal of Colloid and Interface Science
As the search for carbon-efficient synthesis pathways for green alternatives to fossil fuels continues, an expanding class of catalysts have been developed for the upgrading of lower alcohols. Understanding of the acid base functionalities has greatly influenced the search for new materials, but the influence of the metal used in catalysts cannot be explained in a broader sense. We address this herein and correlate our findings with the most fundamental understanding of chemistry to date by applying it to d-band theory as part of an experimental investigation. The commercial catalysts of Pt, Rh, Ru, Cu, Pd, and Ir on carbon as a support have been characterized by means of SEM, EDX-mapping, STEM, XRD, N2-physisorption, and H2-chemisorption. Their catalytic activity has been established by means of c-methylation of ethanol with methanol. For all catalysts, the TOF with respect to i-butanol was examined. The Pt/C reached the highest TOF with a selectivity towards i-butanol of 89%. The trend for the TOFs could be well correlated with the d-band centers of the metal, which formed a volcano curve. Therefore, this study is another step towards the rationalization of catalyst design for the upgrading of alcohols into carbon-neutral fuels or chemical feedstock.
Ru catalyst nanoparticles were encapsulated into the pores of a Cr-based metal-organic framework (MOF)—MIL-101. The obtained material, as well as the non-loaded MIL-101, were investigated down to the atomic scale by annular dark-field scanning transmission electron microscopy using low dose conditions and fast image acquisition. The results directly show that the used wet chemistry loading approach is well-fitted for the accurate embedding of the individual catalyst nanoparticles into the cages of the MIL-101. The MIL-101 host material remains crystalline after the loading procedure, and the encapsulated Ru nanoparticles have a metallic nature. Annular dark field scanning transmission electron microscopy, combined with EDX mapping, is a perfect tool to directly characterize both the embedded nanoparticles and the loaded nanoscale MOFs. The resulting nanostructure of the material is promising because the Ru nanoparticles hosted in the MIL-101 pores are prevented from agglomeration—the stability and lifetime of the catalyst could be improved.
Considering water scarcity, photo-based processes have been presented as a depollution technique, which should be optimized in order to be applied in the future. For that, the addition of an active photocatalyst and the usage of solar radiation are mandatory steps. Thus, Fe3O4–SiO2–TiO2 was synthesized, and its performance was evaluated using simulated solar radiation and methylene blue as a model pollutant. Under optimal conditions, 86% degradation was attained in 1 h. These results were compared to recent published data, and the better performance can be attributed to both the operational conditions selection and the higher photocatalyst activity. Indeed, Fe3O4–SiO2–TiO2 was physico-chemically characterized with techniques such as XRD, N2 isotherms, spectrophotometry, FTIR, electrochemical assays and TEM.