We demonstrate optically tunable control of second-harmonic generation in all-dielectric nanoantennas: by using a control beam that is absorbed by the nanoresonator, we thermo-optically change the refractive index of the radiating element to modulate the amplitude of the second-harmonic signal. For a moderate temperature increase of roughly 40 K, modulation of the efficiency up to 60% is demonstrated; this large tunability of the single meta-atom response paves the way to exciting avenues for reconfigurable homogeneous and heterogeneous metasurfaces.
Reconfigurable metasurfaces have recently gained a lot of attention in applications such as adaptive meta-lenses, hyperspectral imaging and optical modulation. This kind of metastructure can be obtained by an external control signal, enabling us to dynamically manipulate the electromagnetic radiation. Here, we theoretically propose an AlGaAs device to control the second harmonic generation (SHG) emission at nanoscale upon optimized optical heating. The asymmetric shape of the used meta-atom is selected to guarantee a predominant second harmonic (SH) emission towards the normal direction. The proposed structure is concurrently excited by a pump beam at a fundamental wavelength of 1540 nm and by a continuous wave (CW) control signal above the semiconductor band gap. The optical tuning is achieved by a selective optimization of meta-atoms SH phase, which is modulated by the control signal intensity. We numerically demonstrate that the heating induced in the meta-atoms by the CW pump can be used to dynamically tune the device properties. In particular, we theoretically demonstrate a SH beam steering of 8° with respect to the vertical axis for an optimized device with average temperature increase even below 90° C.
We propose a new sensing device based on all-optical nano-objects placed in a suspended periodic array. We demonstrate that the intensity-based sensing mechanism can measure environment refractive index change of the order of , which is close to record efficiencies in plasmonic devices.
Protection of human eyes or sensitive detectors from high-intensity laser radiation is an important challenge in modern light technologies. Metasurfaces have proved to be valuable tools for such light control, but the actual possibility of merging multiple materials in the nanofabrication process hinders their application. Here we propose and numerically investigate the opto-thermal properties of plane multilayered structures with phase-change materials for optical limiters. Our structure relies on thin-film VO2 phase change material on top of a gold film and a sapphire substrate. We show how such a multi-layer structure can act as a self-activating device that exploits light-to-heat conversion to induce a phase change in the VO2 layer. We implement a numerical model to describe the temporal evolution of the temperature and transmittivity across the device under both a continuous wave and pulsed illumination. Our results open new opportunities for multi-layer self-activating optical limiters and may be extended to devices based on other phase change materials or different spectral regions..
The interest in dynamic modulation of light by ultra-thin materials exhibiting insulator–metal phase transition, such as , has rapidly grown due to the myriad industrial applications, including smart windows and optical limiters. However, for applications in the telecommunication spectral band, the light modulation through a thin film is low due to the presence of strong material loss. Here, we demonstrate tailored nanostructuring of to dramatically enhance its transmission modulation, reaching a value as high as 0.73, which is 2 times larger than the previous modulation achieved. The resulting designs, including free-topology optimization, demonstrate the fundamental limit in acquiring the desired optical performance, including achieving positive or negative transmission contrast. Our results on nanophotonic management of lossy nanostructured films open new opportunities for applications of metasurfaces.
Nonlinear metasurfaces have become prominent tools for controlling and engineering light at the nanoscale. Usually, the polarization of the total generated third harmonic is studied. However, diffraction orders may present different polarizations. Here, we design an high quality factor silicon metasurface for third harmonic generation and perform back focal plane imaging of the diffraction orders, which present a rich variety of polarization states. Our results demonstrate the possibility of tailoring the polarization of the generated nonlinear diffraction orders paving the way to a higher degree of wavefront control.