Exfoliated g-C₃N₄ is a well-known semiconductor utilized in heterogenous photocatalysis and water splitting. An improvement in light harvesting and separation of photogenerated charge carriers may be obtained by polymer doping with sulfur. In this work, we incorporate sulfur into the polymer chain by chemical polymerization of trithiocyanuric acid (C₃N₃S₃H₃) to obtain C₃N₃S₃. The XRD measurements and TEM images indicated that C₃N₃S₃, in contrast to g-C₃N₄, does not exist in the form of a graphitic structure and is not exfoliated into thin lamellas. However, both polymers have similar optical properties and positions of the conduction and valence bands. The comparative studies of electrochemical oxygen reduction and hydrogen evolution indicated that the overpotentials for the two processes were smaller for C₃N₃S₃ than for g-C₃N₄. The RDE experiments in the oxygen-saturated solutions of 0.1 M NaOH have shown that O₂ is electrochemically reduced via the serial pathway with two electrons involved in the first step. The spectroscopic experiments using NBT demonstrated that both polymers reveal high activity in the photocatalytic reduction of oxygen to superoxide anion radical by the photogenerated electrons.

The hybrid system BiVO₄/g-C₃N₄ is a prospective photocatalyst because of the favorable mutual alignment of the energy bands of both semiconductors. However, the path of the photocatalytic process is still unclear because of contradictory information in the literature on whether the mechanism of charge carrier separation at the BiVO₄/g-C₃N₄ interface is band-to-band or Z-scheme. In this work, we clarified this issue by comparative photocatalytic studies with the use of systems without a mediator and with different kinds of mediators including Au nanoparticles, fullerene derivatives, and the Fe³⁺/Fe²⁺ redox couple. Additionally, the charge transfer dynamics at the BiVO₄/g-C₃N₄ and BiVO₄/mediator/g-C₃N₄ interfaces were investigated by time-resolved photoluminescence (TRPL) measurements, while the influence of the mediator on the surface recombination of the charge carriers was verified by intensity-modulated photocurrent spectroscopy (IMPS). We proved that the charge carrier separation at the BiVO₄/g-C₃N₄ interface occurs according to the mechanism typical for a heterojunction of type II, while the incorporation of the mediator between BiVO₄ and g-C₃N₄ leads to the Z-scheme mechanism. Moreover, a very strong synergetic effect on caffeine (CAF) degradation rate was found for the system BiVO₄/Au/g-C₃N₄ in the presence of Fe³⁺ ions in the CAF solution.

High-quality perovskite film with large grains and therefore reduced grain boundaries plays a significant role in improving the power conversion efficiency (PCE) and ensuring good long-term stability of the perovskite solar cells. In this work, we found that adding camphorsulfonic acid (CSA), a Lewis base, to the perovskite solution results in the crystallization of larger perovskite grains. By varying the concentration of CSA, we found that the optimal concentration of the additive is 1 mg/mL, which leads to an 20% increase in PCE of the cells compared to the reference CSA-free cell. Interestingly, we observed that the PCE of cells with an excess of CSA was initially poor, but may increase significantly over time, possibly due to CSA migration to the hole-transporting layer, leading to an improvement in its conductivity.