To address the flammable and chemical unstable problems of liquid electrolyte, the solid electrolyte is a promising candidate to replace liquid electrolyte for solid-state batteries. Herein, a composite polymer electrolyte (CPE) of 3D polyimide (PI)-nanofiber membrane-incorporated polyethylene oxide (PEO)/lithium bis (triflu-romethanesulphonyl) imid (LiTFSI) is reported. Three advantages of the PI nanofiber network in the CPE include providing a continuous, rapid transport channel of lithium ions to improve the Li-ion conductivity, improving the mechanical properties and stability, and effectively inhibiting the dendrite growth of Li metal. The PI/PEO/LiTFSI CPE delivers an ionic conductivity of 4.2 × 10 −4 S cm −1 at 60 °C, a wider electrochemical window to 5.4 V, and an excellent thermal stability, which result in the excellent electrochemical performance of LiFePO 4 full cells assembled with PI/PEO/LiTFSI CPE.
Solid-state batteries (SSBs) have attracted considerable attention for high-energy-density and high-safety energy storage devices. Many efforts have focused on the thin solid-state-electrolyte (SSE) films with high room-temperature ionic conductivity, flexibility, and mechanical strength. Here, we report a composite polymer electrolyte (CPE) reinforced by electrospun PI nanofiber film, combining with succinonitrile-based solid composite electrolyte. In situ photo-polymerization method is used for the preparation of the CPE. This CPE, with a thickness around 32.5 μm, shows a high ionic conductivity of 2.64 × 10−4 S cm−1 at room temperature. It is also fireproof and mechanically strong, showing great promise for an SSB device with high energy density and high safety.