The principal features essential for the success of an orthopaedic implant are its shape, dimensional accuracy, and adequate mechanical properties. Unlike other manufactured products, chemical stability and toxicity are of increased importance due to the need for biocompatibility over an implants life which could span several years. Thus, the combination of mechanical and biological properties determines the clinical usefulness of biomaterials in orthopaedic and musculoskeletal trauma surgery. Materials commonly used for these applications include stainless steel, cobalt-chromium and titanium alloys, ceramics, polyethylene, and poly(methyl methacrylate) (PMMA) bone cement. This study reviews the properties of commonly used materials and the advantages and disadvantages of each, with special emphasis on the sensitivity, toxicity, irritancy, and possible mutagenic and teratogenic capabilities. In addition, the production and final finishing processes of implants are discussed. Finally, potential directions for future implant development are discussed, with an emphasis on developing advanced personalised implants, according to a patient’s stature and physical requirements.

This paper provides a review of the methods developed over the years for reducing working forces for the precision metal forming processes. Precision forging normally involves completely, or near completely closed cavity dies with no or minimal draft, making features on the extremities difficult to fill and requiring high loads. Means to minimise load, in order to enhance tool life, or reduce press capacity are crucial to the success of precision forging processes. The main concentration of this study is on design features which can be incorporated in tooling and/or workpiece in order to assist in minimisation of forging load while achieving complete die filling. The load reduction methods are presented using examples mainly of precision gear forging, which is representative of the precision forging of other axisymmetric components with complex peripheral shape. The methods reviewed are divided into the categories of (i) billet design, (ii) tool design and (iii) process design. Their effects on forging load reduction for precision forging, along with the authors’ opinions as to the benefits, drawbacks and applicability of each, are presented.

This paper provides a review of recent developments in the manufacturing of lightweight multi-metal components, and in particular gears. The literature has shown that significant efforts have been made in manufacturing light gears and numerous technical challenges exist when designing for and manufacturing with dissimilar metals including challenges in heating technologies, mechanical performance, processing parameters, metal compatibility and the interface layer between adjacent materials, as well as difficulties in multi-metal simulations. Whilst the scope of multi-metal manufacturing is vast, the main concentration of this study is on the main stages of multi-metal gear production, and specifically on preform production, multi-metal heating, intermetallic bonding, and modelling of essential forming parameters. The effects of each of these methods as well as the numerous approaches studied in the literature are presented, with a recommendation being made as to a processing route that may lead to a robust multi-metal gear with minimal production line modifications to conventional steel gears.

An intrinsic feature of the hot stamping process, in which a hot blank is quenched and formed between water cooled dies, is the severe thermo-mechanical deformation that the blank experiences under the combined influences of non-isothermal and non-proportional loadings. This results in challenges for conventional forming limit prediction models to accurately predict material behavior. In this paper, a novel viscoplastic-Hosford-MK model was developed to predict the forming limits of an Al-Li alloy under hot stamping conditions. The effectiveness of the developed model was verified by the demonstration of accurate responses to cold die quenching, strain rate and loading path changes, enabling the developed model to reveal a realistic critical material response under complex deformation conditions. Finally, by applying the developed model to the hot stamping of an AA2060 component, its accuracy was successfully validated. It was indicated that the onset of necking during hot stamping of the component did not necessarily occur at the maximum thinning region, and this was due to the comprehensive effects of varying loading path, strain rate and temperature. A detailed mathematical analysis of the developed M-K model was also conducted, and it was found that the incremental work per unit volume ratio (View the MathML source) between Zone b (where a thickness inhomogeneity exists) and Zone a (the remainder of the material) was a significant parameter that determined the formability of AA2060 under hot stamping conditions

In this paper, aluminide coatings of various thicknesses and microstructural uniformity obtained using chemical vapor deposition (CVD) were studied in detail. The optimized CVD process parameters of 1040 °C for 12 h in a protective hydrogen atmosphere enabled the production of high density and porosity-free aluminide coatings. These coatings were characterized by beneficial mechanical features including thermal stability, wear resistance and good adhesion strength to MAR 247 nickel superalloy substrate. The microstructure of the coating was characterized through scanning electron microscopy (SEM), X-ray energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD) analysis. Mechanical properties and wear resistance of aluminide coatings were examined using microhardness, scratch test and standardized wear tests, respectively. Intermetallic phases from the Ni-Al system at specific thicknesses (20–30 µm), and the chemical and phase composition were successfully evaluated at optimized CVD process parameters. The optimization of the CVD process was verified to offer high performance coating properties including improved heat, adhesion and abrasion resistance.