Underground fault water inrush is a hydrogeological disaster that frequently occurs in underground mining and tunnel construction projects. Groundwater may pour from an aquifer when disasters occur, and aquifers are typically associated with fractured rock formations. Water inrush accidents are likely to occur when fractured rock masses are encountered during excavation. In this study, Comsol Multiphysics, cross-platform multiphysics field coupling software, was used to simulate the evolution characteristics of water flow in different flow fields of faults and aquifers when water inrush from underground faults occurs. First, the Darcy and Brinkman flow field nonlinear seepage models were used to model the seepage law of water flow in aquifers and faults. Second, the Forchheimer flow field was used to modify the seepage of fluid in fault-broken rocks in the Brinkman flow field. In general, this phenomenon does not meet the applicable conditions of Darcy’s formula. Therefore, the Darcy and Forchheimer flow models were coupled in this study. Simulation results show that flow behavior in an aquifer varies depending on fault permeability. An aquifer near a fault is likely to be affected by non-Darcy flow. That is, the non-Darcy effect zone will either increase or decrease as fault permeability increases or decreases. The fault rupture zone that connects the aquifer and upper roadway of the fault leads to fault water inrush due to the considerably improved permeability of the fractured rock mass.
25 April 2014 in Journal of Central South University
Seepage flow is one of the primary factors that trigger slopes and landslides’ failure. In this study, the slope stability under saturated or unsaturated conditions is analyzed. The influence of a complex stress state on the slope stability with the saturated or unsaturated seepage flow is proposed in this paper. Firstly, an elastoplastic constituted model for the soil under a complex stress state is established and as a user subroutine of the finite element method code of FLAC. Secondly, the 2D and 3D problems of slope stability influenced by the saturated or unsaturated seepage flow are analyzed via the finite difference method with the influence of the complex stress state. Finally, the influence of the intermediate principal stress and the saturated or unsaturated seepage flow on the slope stability is analyzed in this study.
With the rapid development of asphalt concrete core rockfill dams (ACCRDs), the construction of ultra-high asphalt concrete core rockfill dams (UACCRDs) has been improved significantly. However, the security problems of asphalt concrete core (ACC) become very prominent with the increase of dam height. The shear failure control standard and tensile failure control standard of ACC are suggested. The mechanisms of ACC that generate high shear stress and high tensile stress are investigated. Based on the definition of stress level and the transmission mechanism of arch structures, the improvement methods that reduce the high shear stress and high tensile stress of ultra-high asphalt concrete core (UACC) are proposed and investigated. The results show that the stress level of ACC can be reduced significantly by the increase of the strength parameters of ACC (failure ratio, cohesion, and internal friction angle). The following value ranges of the failure ratio, cohesion, and internal friction angle of ACC for the suitable construction of UACCRDs are recommended: Rf ≥ 0.75, C ≥ 0.30 MPa, and φ ≥ 28.5° (h = 150 m), with the growth gradient adjusted by 5%, 15%, and 5%/25 m. The tensile stress and tensile stress area can be reduced obviously by the new type of dams (curved asphalt concrete core rockfill dams (CACCRDs)). The value ranges of the curvature of CACC (k ≥ 1.0 × 10−3) for the suitable construction of UACCRDs are recommended.