Geopolymer is an eco-friendly material used in civil engineering works. For geopolymer concrete (GPC) preparation, waste fly ash (FA) and calcined clay (CC) together were used with percentage variation from 5, 10, and 15. In the mix design for geopolymers, there is no systematic methodology developed. In this study, the random forest regression method was used to forecast compressive strength and split tensile strength. The input content involved were caustic soda with 12 M, 14 M, and 16 M; sodium silicate; coarse aggregate passing 20 mm and 10 mm sieve; crushed stone dust; superplasticizer; curing temperature; curing time; added water; and retention time. The standard age of 28 days was used, and a total of 35 samples with a target-specified compressive strength of 30 MPa were prepared. In all, 20% of total data were trained, and 80% of data testing was performed. Efficacy in terms of mean absolute error (MAE), root mean square error (RMSE), coefficient of determination (R2), and MSE (mean squared error) is suggested in the model. The results demonstrated that the RFR model is likely to predict GPC compressive strength (MAE = 1.85 MPa, MSE = 0.05 MPa, RMSE = 2.61 MPa, and R2 = 0.93) and split tensile strength (MAE = 0.20 MPa, MSE = 6.83 MPa, RMSE = 0.24 MPa, and R2 = 0.90) during training.
5 July 2021 in Advances in Materials and Processing Technologies
In today’s world of advanced technology tacked with Artificial Intelligence and neural networks, dealing with geopolymer composites that involve multiple variables, there is tremendous scope for methods that can accurately predict the strength parameters, as no standard mixed design IS code has been developed. Since the quantities of silica modulus, Na2SiO3 material, water to binder ratios, curing time, curing temperature all have a significant impact on compressive strength. A multi-layer ANN can therefore be built for geopolymer compressive strength prediction by the use of the backpropagation architecture. Such computing tools will be better, cheaper, time-saving, and labour-saving in terms of resource allocation. In the current study, compressive strength prediction of geopolymer composite containing fly ash and ground granulated blast furnace slag was performed using a type of artificial neural network (ANN), specifically multilayer perceptron (MLP). In this paper, a total of three hundred seventy-six fact points were accumulated from the literature. The coefficient of determination (R2) was used to assess the proposed model’s accuracy in this analysis. The MLP model proposed will forecast geopolymer compressive strength with an R2 value of 0.968. The algorithm trained and tested the model.
30 June 2021 in Advances in Materials and Processing Technologies
Machine learning technology is commonly used for the prediction of the compressive strength of geopolymer composites. This research is focused on using algorithms ensembled by heterogeneous regression methods with stacking. Modelling is done with variables such as fly ash, fine aggregate, coarse aggregate, sodium hydroxide (NaOH), Sodium Silicate (Na2SiO3), molarity, added water, ground granulated blast furnace slag (GGBS), superplasticizer, curing time, and curing temperature. A total of 376 data points were collected from the standard literature. Various statistical metrics, such as mean absolute error (MAE), correlation coefficient (R), and root mean square error (RMSE), are used to measure model results. The algorithm developed shows 90% efficiency. This accuracy of data suggests that the proposed stacked combination algorithm would help the construction industry in the prediction of the amount of constituent required for an expected compressive strength of any of the above-listed input data, as now one can curb the unnecessary ingredients and promote only required ingredients as per the suggested method. A strong association was found between machine learning models and experimental findings.
15 February 2022 in IP International Journal of Periodontology and Implantology
A wide range of accidents might happen during the treatment of the root canal system, where the instrument breakage is one of the most unpleasant occurrences. Several techniques have been developed to facilitate the removal of the broken instruments. The aim of this article is to present the surgical removal of a broken endodontic file from the periapical region of the palatal root of a maxillary first molar depicting importance of radiographs.