The present study was aimed at assessing drinking water quality regarding arsenic (As) and its impact on health from Mailsi (Punjab), Pakistan. Forty-four groundwater samples were collected from two sites, Sargana and Mailsi. Arsenic and other cations were determined by atomic absorption spectrophotometer, whereas the anions were determined either through titration or spectrophotometer. The results revealed that dominant anions were HCO3− and Cl−, Ca+2 was the dominant cation, and overall water chemistry of the area was CaMgHCO3− type. Arsenic concentrations were high, ranging from 11 to 828 µg/L that crossed the World Health Organization permissible limits. Likewise, higher SO4−2 concentrations ranging from 247 to 1053 mg/L were observed. The health risk index was higher in the Sargana site, which employed the differences in terms of higher Average Daily Dose, Hazard Quotient, and Carcinogenic Risk of arsenic, which is unsuitable for drinking purposes. The area seems to be at high risk due to arsenic pollution and wells have never been tested for arsenic concentrations earlier; therefore, necessary measures should be taken to test the wells with respect to arsenic.
15 October 2016 in Environmental Chemistry Letters
Finding appropriate adsorbent may improve the quality of drinking water in those regions where arsenic (As) and fluoride (F−) are present in geological formations. In this study, we evaluated the efficiency of potato peel and rice husk ash (PPRH-ash)-derived adsorbent for the removal of As and F from contaminated water. Evaluation was done in batch adsorption experiments, and the effect of pH, initial adsorbate concentration, contact time, and adsorbent dose were studied. Characteristics of adsorbents were analyzed using scanning electron micropcope (SEM) and Fourier transform infrared (FTIR) spectroscopy. Both the Langmuir and Freundlich isotherm models fitted well for F− and As sorption process. The maximum adsorption capacity of adsorbent for As and F− was 2.17 μg g−1 and 2.91 mg g−1, respectively. The As and Fi removal was observed between pH 7 and 9. The sorption process was well explained with pseudo-second order kinetic model. Arsenic adsorption was not decreased in the presence of carbonate and sulfate. Results from this study demonstrated potential utility of this agricultural biowaste, which could be developed into a viable filtration technology for As and F− removal in As- and F-contaminated water streams.