We fabricated (Ba,K)Fe 2 As 2 superconducting wires and tapes using the powder-in-tube method and hot isostatic pressing (HIP). HIP wires and tapes showed a high value of transport critical current density ( Jc ) exceeding 100 kAcm −2 at T = 4.2 K and the self-field. Transport Jc in the HIP wire reached 38 kAcm −2 in a high magnetic field of 100 kOe. This value is almost twice larger than the previous highest value of Jc among round wires using iron-based superconductors. Enhancement of Jc in the wires and tapes was caused by improvement of the drawing process, which caused degradation of the core, formation of microcracks, weak links between grains, and random orientation of grains. Details of the effect of the improved fabrication processes on the Jc are discussed.
(Ba,K)Fe2As2 superconducting wires and tapes are fabricated by using hot isostatic pressing (HIP) technique, and their superconducting properties are studied. In the HIP round wire, transport critical current density (Jc) at 4.2 K has achieved record-high value of 175 kA cm−2 at zero field, and exceeds 20 kA cm−2 even at 100 kOe. Improvement of polycrystalline powder synthesis may play a key role for the enhancement of Jc. In the HIP tape, even larger transport Jc of 380 kA cm−2 is realized at zero field. Based on magnetization and magneto-optical measurements, possible further enhancement of Jc is discussed.
16 November 2015 in Superconductor Science and Technology
The evolution of the superconducting properties of round wires of (Ba,K)Fe 2 As 2 fabricated by the powder-in-tube (PIT) method is systematically studied. After establishing the method to obtain the largest transport critical current density ( Jc ) in round wires using the hot isostatic press technique, we investigated how the transition temperature ( Tc ), Jc , and microstructures change at each step of the wire fabrication. Unexpectedly, we find that superconducting properties of the wire core are significantly damaged by the drawing process. Systematic measurements of Jc and Tc of the core superconductor after each drawing and sintering process clarified the evolution of degradation by the drawing process and recovery by heat treatment.
We use resonant inelastic x-ray scattering to investigate charge-stripe correlations in . By differentiating elastic from inelastic scattering, it is demonstrated that charge-stripe correlations precede both the structural low-temperature tetragonal phase and the transport-defined pseudogap onset. The scattering peak amplitude from charge stripes decays approximately as towards our detection limit. The in-plane integrated intensity, however, remains roughly temperature independent. Therefore, although the incommensurability shows a remarkably large increase at high temperature, our results are interpreted via a single scattering constituent. In fact, direct comparison to other stripe-ordered compounds (, , and ) suggests a roughly constant integrated scattering intensity across all these compounds. Our results therefore provide a unifying picture for the charge-stripe ordering in La-based cuprates. As charge correlations in extend beyond the low-temperature tetragonal and pseudogap phase, their emergence heralds a spontaneous symmetry breaking in this compound.
6 September 2021 in Superconductor Science and Technology
We report the fabrication of small (Ba, A )Fe 2 As 2 ( A : Na, K) coils using 10 m-class long round wires, fabricated by the powder-in-tube method. Coils are sintered using the hot-isostatic-press technique after glass-fiber insulations are installed. Critical current ( Ic ) of the whole coil using (Ba,Na)Fe 2 As 2 and (Ba,K)Fe 2 As 2 are 60 A and 66 A under the self-field, and the generated magnetic fields at the center of the coil reach 2.6 kOe and 2.5 kOe, respectively. Furthermore, the largest transport critical current density ( Jc ) and Ic in (Ba,Na)Fe 2 As 2 wires picked up from the coil reach 54 kA cm −2 and 51.8 A at T = 4.2 K under a magnetic field of 100 kOe, respectively. This value exceeds transport Jc of all previous iron-based superconducting round wires. Texturing of grains in the core of the wire due to the improvement of the wire drawing process plays a key role for the enhancement of Jc .