A quaternized polybenzimidazole (PBI) membrane was synthesized by grafting a dimethylimidazolium end-capped side chain onto PBI. The organic–inorganic hybrid membrane of the quaternized PBI was prepared via a silane-induced crosslinking process with triethoxysilylpropyl dimethylimidazolium chloride. The chemical structure and membrane morphology were characterized using NMR, FTIR, TGA, SEM, EDX, AFM, SAXS, and XPS techniques. Compared with the pristine membrane of dimethylimidazolium-functionalized PBI, its hybrid membrane exhibited a lower swelling ratio, higher mechanical strength, and better oxidative stability. However, the morphology of hydrophilic/hydrophobic phase separation, which facilitates the ion transport along hydrophilic channels, only successfully developed in the pristine membrane. As a result, the hydroxide conductivity of the pristine membrane (5.02 × 10−2 S cm−1 at 80 °C) was measured higher than that of the hybrid membrane (2.22 × 10−2 S cm−1 at 80 °C). The hydroxide conductivity and tensile results suggested that both membranes had good alkaline stability in 2M KOH solution at 80 °C. Furthermore, the maximum power densities of the pristine and hybrid membranes of dimethylimidazolium-functionalized PBI reached 241 mW cm−2 and 152 mW cm−2 at 60 °C, respectively. The fuel cell performance result demonstrates that these two membranes are promising as AEMs for fuel cell applications.
To date, the increase in reactive oxygen species (ROS) production for effectual photodynamic therapy (PDT) treatment still remains challenging. In this study, a facile and effective approach is utilized to coat mesoporous silica (mSiO2) shell on the ligand-free upconversion nanoparticles (UCNPs) based on the LiYF4 host material. Two kinds of mesoporous silica-coated UCNPs (UCNP@mSiO2) that display green emission (doped with Ho3+) and red emission (doped with Er3+), respectively, were successfully synthesized and well characterized. Three photosensitizers (PSs), merocyanine 540 (MC 540), rose bengal (RB), and chlorin e6 (Ce6), with the function of absorption of green or red emission, were selected and loaded into the mSiO2 shell of both UCNP@mSiO2 nanomaterials. A comprehensive study for the three UCNP@mSiO2/PS donor/acceptor pairs was performed to investigate the efficacy of fluorescence resonance energy transfer (FRET), ROS generation, and in vitro PDT using a MCF-7 cell line. ROS generation detection showed that as compared to the oleate-capped and ligand-free UCNP/PS pairs, the UCNP@mSiO2/PS nanocarrier system demonstrated more pronounced ROS generation due to the UCNP@mSiO2 nanoparticles in close vicinity to PS molecules and a higher loading capacity of the photosensitizer. As a result, the three LiYF4 UCNP@mSiO2/PS nanoplatforms displayed more prominent therapeutic efficacies in PDT by using in vitro cytotoxicity tests.
In order to enhance the thermomechanical behaviors of epoxy molding compounds, the hexagonal boron nitride (h-BN) fillers were incorporated in a ketone mesogenic liquid crystalline epoxy (K–LCE) matrix to prepare a high-performance epoxy composites. The h-BN was modified by surface coupling agent 3-aminopropyltriethoxysilane (APTES). The grafting of silane molecules onto the surface of BN fillers improved the compatibility and homogeneous dispersion state of BN fillers in the K–LCE matrix with a strong interface interaction. The surface-modified BN fillers were characterized using Fourier transform infrared spectroscopy. The thermomechanical properties and morphologies of K–LCE/BN composites loading with different contents of modified BN fillers, ranging from 0.50 to 5.00 wt%, were investigated. These results show that modified BN fillers uniformly dispersed in K–LCE matrix, contributing to the enhancement in storage modulus, glass transition temperatures, impact strength and reduction in the coefficient of thermal expansion (CTE). The thermal stability and char yield of the K–LCE/BN composites were increased by increasing the amount of modified BN fillers and the thermal decomposition temperatures of composites were over 370 °C. The thermal conductivity of the K–LCE/BN composites was up to 0.6 W/m·K, for LC epoxy filled with 5.00-wt%-modified BN fillers. Furthermore, the K–LCE/BN composites have excellent thermal and mechanical properties compared to those of the DGEBA/BN composites.
A 1,4-bis((9H-carbazol-9-yl)methyl)benzene (DCB)-containing homopolymer (P(DCB)) and four DCB- and ED-derivative (3,4-ethylenedioxythiophene (EDOT) and 3,4-ethylenedioxythiophene-methanol (EDm))-containing copolymers (P(DCB-co-ED), P(2DCB-co-ED), P(DCB-co-EDm), and P(2DCB-co-EDm)) were electropolymerized on ITO-polyethylene terephthalate (PET) substrates and their electrochromic performances were studied. DCB displays a lower Eonset than that of EDOT and EDm, conjecturing that the biscarbazole-containing DCB group shows a stronger electron-donating property than that of the ED derivatives. The P(2DCB-co-ED) film presents slate grey, dark khaki, and dark olive green at 0.0, 1.0, and 1.2 V. Bleaching-to-coloring switching studies of polymers show that P(2DCB-co-EDm) shows a high ΔT (31.0% at 725 nm) in solutions. Five dual-layer flexible electrochromic devices (ECDs) based on P(DCB), P(DCB-co-ED), P(2DCB-co-ED), P(DCB-co-EDm), and P(2DCB-co-EDm) as the anodic materials and PEDOT-PSS as the cathodic material are constructed. The P(2DCB-co-ED)/PEDOT-PSS flexible ECD shows a high ΔT (40.3% at 690 nm) and long-term electrochemical cycling stability, while the P(DCB-co-EDm)/PEDOT-PSS ECD shows a high ΔT (39.1% at 640 nm) and short response time (≤1.5 s). These findings offer us a new structural insight for the valuable design of conjugated polymers in high-contrast, flexible ECDs.
A replacement for the original F-spanner is designed using computer-aided engineering (CAE) and the Taguchi method. In the design process, the L9(34) orthogonal table was used for parameter design. Four control factors are used: outer diameter, bend radius, angle, and connected fillet. Each factor is set to three levels with numerical analysis using ANSYS software. After performing an optimization analysis for the combination parameters, the prototype is created by rapid-prototyping (RP) and is found to improve operational safety in a piping system.