xiaoyu ni

Dr. xiaoyu ni


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 January 2014 in Computer Methods in Biomechanics and Biomedical Engineering
Verified
Journal Article
Closed access
XNxiaoyu ni
xiaoyu ni
CPChang-Wang Pan
Chang-Wang Pan
GPGangadhara - Gangadhara Prusty
Gangadhara - Gangadhara Prusty
This paper discusses various issues relating to the mechanical properties of a braided non-vascular stent made of a Ni–Ti alloy. The design of the stent is a major factor which determines its reliability after implantation into a stenosed non-vascular cavity. This paper presents the effect of the main structural parameters on the mechanical properties of braided stents. A parametric analysis of a commercial stent model is developed using the commercial finite element code ANSYS. As a consequence of the analytical results that the pitch of wire has a greater effect than other structural parameters, a new design of a variable pitch stent is presented to improve mechanical properties of these braided stents. The effect of structural parameters on mechanical properties is compared for both stent models: constant and variable pitches. When the pitches of the left and right quarters of the stent are 50% larger and 100% larger than that of the central portion, respectively, the radial stiffness in the central portion increases by 10% and 38.8%, while the radial stiffness at the end portions decreases by 128% and 164.7%, the axial elongation by 25.6% and 56.6% and the bending deflection by 3.96% and 10.15%. It has been demonstrated by finite element analysis that the variable pitch stent can better meet the clinical requirements.

1 January 2022 in IEEE Access
Verified
Journal Article
Open access
CZChenxin Zhou
Chenxin Zhou
HWHonghong Wang
Honghong Wang
YLYang Liu
Yang Liu
XNxiaoyu ni
xiaoyu ni
YLYing Liu
Ying Liu
Green plums are a characteristic fruit resource in China, with a long history of cultivation. Many surface defects will appear in the growth, transportation and preservation of green plums which seriously affect the processing quality of by-products. The existing manual sorting method of green plums is limited by the experience of workers. It is difficult to ensure the quality and speed of detection. Therefore, the formation of automatic detection of green plums surface defects is of great significance to the development of green plum industry. According to the surface defects of green plums, this paper divides green plums into five categories: rot, cracks, scars, spots and normal. A total of 1235 images of green plums were obtained by self-built image acquisition device. The WideResNet50-AdamW-Wce model based on WideResNet model was built to classify the surface defects of green plums. Accuracy, recall and F1-measure were selected as the indexes to evaluate the accuracy of classification. The accuracy of classification reached 98.95 %, and the classification accuracy of rain spots, normal, scars, rot and crack reached 100 %, 99.56 %, 98.59 %, 98.25 % and 96.10 % respectively. Comparing the performance of ResNet50-SGD, WideResNet50-SGD, WideResNet50-SGD-Wce and WideResNet50-AdamW network models, the F1-Measure based on WideResNet50-AdamW-Wce is the highest in each defect, and more greengage defect features can be learned. The detection results can meet the production needs of plum deep processing enterprises – evaluating 1800 green plums per hour on the assembly line.

29 May 2022 in Sensors
Verified
Journal Article
Open access
PDF file
BWBin Wang
Bin Wang
FLFengshun Li
Fengshun Li
RLRongjian Lu
Rongjian Lu
XNxiaoyu ni
xiaoyu ni
WZWenhan Zhu
Wenhan Zhu
Laser welding is an indispensable link in most types of industrial production. The realization of welding automation by industrial robots can greatly improve production efficiency. In the research and development of the welding seam tracking system, information on the position of the weld joint needs to be obtained accurately. For laser welding images with strong and complex interference, a weld tracking module was designed to capture real-time images of the weld, and a total of 737, 1920 × 1200 pixel weld images were captured using the device, of which 637 were used to create the dataset, and the other 100 were used as images to test the segmentation success rate. Based on the pixel-level segmentation capability of the semantic segmentation network, this study used an encoder–decoder architecture to design a lightweight network structure and introduced a channel attention mechanism. Compared to ERF-Net, SegNet, and DFA-Net, the network model in this paper has a fast segmentation speed and higher segmentation accuracy, with a success rate of 96% and remarkable segmentation results.

21 March 2022 in International Journal for Numerical Methods in Biomedical Engineering
Verified
Journal Article
Closed access
YZYanhong Zhang
Yanhong Zhang
XNxiaoyu ni
xiaoyu ni
CPChangwang Pan
Changwang Pan

24 March 2018 in International Journal for Numerical Methods in Biomedical Engineering
Verified
Journal Article
Closed access
PDF file
XNxiaoyu ni
xiaoyu ni
YZYan‐Hong Zhang
Yan‐Hong Zhang
HZHai‐Xia Zhao
Hai‐Xia Zhao
CPChang‐Wang Pan
Chang‐Wang Pan

25 May 2020 in International Journal for Numerical Methods in Biomedical Engineering
Verified
Journal Article
Closed access
PDF file
XNxiaoyu ni
xiaoyu ni
YZYanhong Zhang
Yanhong Zhang
CPChangwang Pan
Changwang Pan