Wind turbine aerodynamic interactions within wind farms lead to significant energy losses. Optimizing the flow between turbines presents a promising solution to mitigate these losses. While analytical models offer a fundamental approach to understanding aerodynamic interactions, further development and refinement of these models are imperative. We propose a simplified analytical model that combines the Gaussian wake model and the cylindrical vortex induction model to evaluate the interaction between wake and induction zones in 3.5 MW wind turbines with 328 m spacing. The model’s validation is conducted using field data from a nacelle-mounted LiDAR system on the downstream turbine. The ‘Direction to Hub’ parameter facilitates a comparison between the model predictions and LiDAR measurements at distances ranging from 50 m to 300 m along the rotor axis. Overall, the results exhibit reasonable agreement in flow trends, albeit with discrepancies of up to 15° in predicting peak interactions. These deviations are attributed to the single-hat Gaussian shape of the wake model and the absence of wake expansion consideration, which can be revisited to improve model fidelity. The ‘Direction to Hub’ parameter proves valuable for model validation and LiDAR calibration, enabling a detailed flow analysis between turbines. This analytical modeling approach holds promise for enhancing wind farm efficiency by advancing our understanding of turbine interactions.
Changing the magnetic field on a conductor metal can induce eddy currents, which cause heat generation. In this paper, we use this idea to convert wind energy into thermal energy directly. This system contains a vertical axis wind turbine and an eddy currents heat generator. The eddy currents heat generator has two parts. The first part is a rotor with some permanent magnets causing the magnetic field changes, and the second part is a stator that acts as a conductor. The magnetic field changes in the heat generator play an important role in power output; therefore, we test four different magnet arrangements with different pole numbers on the rotor at different rotational speeds from 100 rpm to 500 rpm to measure the input torque and power needed to rotate each model. Then, based on the measured data, the wind turbine is designed by Qblade software based on the blade element momentum theory. It is shown that compared to the weight of the heat generator and the area of magnetization, designing a proper magnet arrangement for the heat generator can change the output power considerably as it can trigger the magnetic field fluctuation along the direction of rotation. For example, opting for a proper arrangement on the rotor decreases the number of poles from 120 to 24 but increases the power input from 223 W to 1357 W.