The current study aimed at delving into the thermodynamic study of a trigeneration cycle based on biomass fuel, combined with an Organic Rankine Cycle (ORC) and an absorption chiller. Biomass fuel is purely produced from Municipal Solid Waste (MSW). Energy and exergy analyses were carried out using the solar collector employing optimized characteristics to provide the required thermal energy at the ideal condition to utilizing in the high-temperature gasification process having hot steam. For supplying electricity, heating and cooling power, a Rankine cycle including a turbine, a heater, and a single effect absorption chiller was considered. To solar energy exploitation, a parabolic trough solar collector and hot steam gasifier were utilized. ORC can efficiently recover low-grade waste heat due to its excellent thermodynamic performance. Based on the examinations, the effects of critical thermodynamic parameters on the exergy efficiency and optimization of the trigeneration cycle and ORC with R134a, as working fluid, was conducted to achieve the system optimization design from thermodynamic aspect through Genetic Algorithm (GA). In this study, exergy destruction and its percentage in the power generation process were calculated as well. Results indicated that the studied system has the potential to generate 11.2 kW electricity, 17.4 kW heating power, 15.3 kW cooling power with the energy and exergy efficiencies of 64.3 % and 52%. It was also revealed that the output power of this system is fixed on the constant amount of 11.2 KW, which is obtained from the microturbine and ORC turbine. Additionally, it was demonstrated that the most exergy destructions are for gasifier, compressor, and combustor respectively, containing 47 %, 26.3 % and 14 % of the destructions. Finally, the optimized performance of the system was determined using GA and exergy efficiency as an objective function. The optimized trigeneration energy system could yield the exergy efficiency of 4.4%.

Due to the growth of population and industrialization, a great number of problems associated with producing industrial wastes have been created for both the environment and human beings. The industrial waste management in Brujen industrial park, located in the western part of Iran, has been investigated in this study using the environmental rapid impact assessment matrix technique. For this purpose, the effective activities and components were classified. The determination of the best scenarios with the least impact on the environment was performed by developing the scenarios for possible industrial waste disposal and making calculations by the rapid impact assessment matrix method. The components of the environment were first classified into physical/chemical, economic/operational, biological/ecological, and social/cultural items. Afterward, with respect to the criteria of the rapid impact assessment matrix method, the importance of environmental impacts was determined by standard scoring of the developed scenarios. Ultimately, the environmental score of each component for the scenarios was calculated using the rapid impact assessment matrix method, and the best scenario with the least environmental impacts was selected through a quantitative comparison. According to the results, scenario 3 (pyrolysis) and scenario 1 (recycling) were found to have the most negative impact and the most positive impact on the environment. Scenario 4 (incineration), with its severe air pollution, obtained a high negative score and was excluded from the options. As a result, two systems of recycling (scenario 1) and the sanitary landfill (scenario 2) were identified as complementary to each other and were selected as a solid waste management method. (C) 2020 GJESM. All rights reserved.

Nowadays, water savings on industrial plants have become a significant concern for various plants and sections. It is vitally essential to propose applicable and efficient techniques to retreat produced water from onshore and offshore production units. This paper aimed to implement the PFF (Photo Fenton Flotation) method to optimize the water treatment procedure, as it is a two-stage separation technique. The measurements were recorded for the HF (hydraulic fracturing) and CEOR (chemically enhanced oil recovery) methods separately to compare the results appropriately. To assure the efficiency of this method, we first recorded the measurements for five sequential days. As a result, the total volume of 2372.5 MM m³/year of water can be saved in the HF process during the PFF treatment procedure, and only 20% of this required fresh water should be provided from other resources. On the other hand, the total volume of 7482.5 MM m³/year of water can be saved in CEOR processes during the PFF treatment procedure, and only 38% of this required fresh water should be provided from other resources. Therefore, the total water volume of 9855 MM m³ can be saved each year, indicating the efficiency of this method in supplying and saving the water volume during the production operations from oilfield units.