Four varieties of barley (Esma, AC Metacalf, Tradition, and AB Cattlelac), representing four Canadian barley classes, were stored at 17% moisture content (mc) for 8 week. Stored barely was characterized using synchrotron X-ray phase contrast microcomputed tomography, synchrotron X-ray fluorescence imaging, and mid-infrared spectroscopy at the Canadian Light Source, Saskatoon. The deterioration was observed in all the selected varieties of barley at the end of 8 week of storage. Changes due to spoilage over time were observed in the grain microstructure and its nutrient distribution and composition. This study underscores the critical importance of the initial condition of barley grain microstructure in determining its storage life, particularly under unfavorable conditions. The hulled barley varieties showed more deterioration in microstructure than the hulless varieties of barley, where a direct correlation between microstructural changes and alterations in nutritional content was found. All selected barley classes showed changes in the distribution of nutrients (Ca, Fe, K, Mn, Cu, and Zn), but the two-row AC Metcalf variety exhibited more substantial variations in their nutrient distribution (Zn and Mn) than the other three varieties during storage. The two-row class barley varieties showed more changes in biochemical components (protein, lipids, and carbohydrates) than the six-row class varieties.
Crop management determinants that manipulate population, diversity and function of soil microbiome are crucial for managing plant health and soil quality, nutrients cycling, ecosystem functioning, and plant-soil feedback. Herein, the objectives of the present preliminary investigation were to assess the impact of plastic film (black and silver) and organic (wheat straw) mulching on the different rhizosphere microbial population, plant growth, and mineral uptake in tomato crop. The measurement of rhizosphere microbial population and plant growth attributes was performed at the vegetative and reproductive growth stages of the tomato crop, while, mineral uptake analysis was carried out at the vegetative stage using the inductively coupled plasma optical emission spectrometry (ICP-OES). The result of experiments revealed that soil mulching favored microbial abundance in the crop rhizosphere, improved plant growth parameters and mineral uptake in tomato plants. The highest bacterial (6.75 ± 0.16 log10 colony-forming units per gram of soil (CFUg−1), and phosphorous solubilizing organisms (5.47 ± 0.02 log10 CFUg−1) population was found in silver mulch while wheat straw (as organic mulch) resulted in the higher fungal (4.64 ± 0.04 log10 CFUg−1), actinomycetes (5.68 ± 0.06 log10 CFUg−1) and rhizobial count (3.77 ± 0.07 log10 CFUg−1) during the vegetative growth. Consistently, the rhizosphere microbial population at the fruiting stage was also found higher in either colored plastic film or organic mulch treatment. Soil mulching also led to the substantial improvement in the plants shoot length, shoot girth and the number of secondary branches both at the vegetative and fruiting stage. ICP-OES analysis of mulched plant revealed the better mineral uptake in different parts of plants. The highest concentration for P (4535.67 ± 92.87 mgkg−1), K (11933.33 ± 338.35 mgkg−1), Mg (10263.33 ± 63.86 mg kg−1) and micronutrients uptake values for Fe (1167.67 ± 16.14 mg kg−1), Mn (133.83 ± 2.15 mg kg−1), and Cu (40.11 ± 0.87 mg kg−1) were observed in the silver film mulch treatment. Likewise, tomatoes from soil mulched conditions also recorded the highest uptake of the analyzed mineral nutrients. The present study revealed that soil mulching could be an effective technique for favorably altering beneficial soil microflora and enhancing mineral uptake in crop plants and thus for improving soil quality and productivity in a sustainable manner.
1 September 2020 in The Indian Journal of Animal Sciences
Male kids (36) at 6 months age, 12 each of Jamunapari, Jakhrana, Barbari breed were equally divided and allotted randomly in plastic and soil floor and reared up to 12 of age through April to September months, fed ad lib. roughage, green fodder and concentrate to meet nutrient requirements for optimum growth. Body weight was recorded fortnightly, physiological responses were recorded twice and blood sampling at 60th and 120th day of trial. The weight gain and ADG on plastic floor was similar as compared to soil floor. Kids were equally comfortable on both floors except RR; however, increased RR on plastic floor did not affect the weight gain in kids. Plasma AST and ALT enzymes, total protein, albumin, total cholesterol, triglycerides level differed non-significantly in kids reared on both plastic and soil floor indicating the suitability of plastic floor in goat shelters in semi-arid conditions.
The potential of hyperspectral imaging (HSI) and synchrotron phase-contrast micro computed tomography (SR-µCT) was evaluated to determine changes in chickpea quality during storage. Chickpea samples were stored for 16 wk at different combinations of moisture contents (MC of 9%, 11%, 13%, and 15% wet basis) and temperatures (10 °C, 20 °C, and 30 °C). Hyperspectral imaging was utilized to investigate the overall quality deterioration, and SR-µCT was used to study the microstructural changes during storage. Principal component analysis (PCA) and Partial Least Squares Discriminant Analysis (PLS-DA) were used as multivariate data analysis approaches for HSI data. Principal component analysis successfully grouped the samples based on relative humidity (RH) and storage temperatures, and the PLS-DA classification also resulted in reliable accuracy (between 80 and 99%) for RH-based and temperature-based classification. The SR-µCT results revealed that microstructural changes in kernels (9% and 15% MC) were dominant at higher temperatures (above 20 °C) as compared to lower temperatures (10 °C) during storage due to accelerated spoilage at higher temperatures (above 20 °C). Chickpeas which had internal irregularities like cracked endosperm and air spaces before storage were spoiled at lower moisture from 8 wk of storage.
10 November 2017 in International Journal of Current Microbiology and Applied Sciences
A study was conducted to find the effect of moisture content on various physical properties of paddy varieties (MTU-1010 and BB-11) suitable for flaking. The range of moisture studied was 11.11% to 28.2% (d.b.) for both the paddy varieties. The bulk density of the paddy increased from 514.76 kg/m3 to 563.62 kg/m3 for MTU-1010 variety and 605.28 kg/m3 to 632.62 kg/m3 for BB-11 variety respectively when the moisture content was increased in the experimental range. The sphericity increased from 0.386 to 0.399 for MTU-1010 variety and 0.448 to 0.458 for BB-11 variety with increase in moisture content. The true density and porosity decreased with the increase in moisture content of paddy. The other physical properties such as test weight, surface area, arithmetic mean diameter, geometric mean diameter and angle of repose increased with the increase in moisture content of paddy. The static coefficient of friction of paddy increased with the increase in moisture content on different surfaces e.g. wood, mild steel, and galvanized iron. The regression equations for all the response variables were significant at P < 0.05 with coefficient of determination, R2 (> 0.90). The amylose content in MTU-1010 and BB-11 variety was found to be 30.23% and 26.32% respectively indicating that high amylose containing paddy varieties are generally used for flaking paddy. Further, the pasting properties of both the paddy varieties revealed higher pasting temperature in paddy variety MTU-1010 than BB-11. The rheological studies highlighted higher storage modulus of brown rice than the polished rice for both the paddy varieties.