This research aims to optimize the tensile mechanical properties in the terminal crimping process in the terminal 064 series using central composite designs (CCD) of response surface methodology (RSM) on pull force using the Minitab 18 Program. Pull force testing is the mechanical property of the indicator in the crimping process. Three independent variables of the crimp dimensions were studied, including crimp height, crimp depth, and crimp width. The optimum crimp dimensions to sustain a maximum impact pull force of 13.60 Kgf were a crimp height of 1.25 mm, crimp depth of 2.36 mm, and crimp width of 1.48 mm for a compaction ratio of 18.63%. The tolerance on the crimp height of 0.05 mm maintained the compaction ratio within the SAE/USCAR-21 Revision 4 standard compaction range of 15 to 20%. This specification requires three consecutive crimp heights to pass electrical and mechanical tests. Using samples built to this compaction range provides the best opportunity to pass such tests whilst also addressing the problem of loose wire strands for a pull force of more than 8 Kgf. Finally, an optimization analysis is carried out to select the finest conditions for the process.
Materials and manufacturing technologies are necessary for tissue engineering and developing temporary artificial extracellular matrices. In this study, scaffolds were fabricated from freshly synthesized titanate (Na2Ti3O7) and its precursor titanium dioxide and their properties were investigated. The scaffolds with improved properties were then mixed with gelatin to form a scaffold material using the freeze-drying technique. To determine the optimal composition for the compression test of the nanocomposite scaffold, a mixture design with three factors of gelatin, titanate, and deionized water was used. Then, the scaffold microstructures were examined by scanning electron microscopy (SEM) to determine the porosity of the nanocomposite scaffolds. The scaffolds were fabricated as a nanocomposite and determined their compressive modulus values. The results showed that the porosity of the gelatin/Na2Ti3O7 nanocomposite scaffolds ranged from 67% to 85%. When the mixing ratio was 100:0, the degree of swelling was 22.98%. The highest swelling ratio of 85.43% was obtained when the freeze-drying technique was applied to the mixture of gelatin and Na2Ti3O7 with a mixing ratio of 80:20. The specimens formed (gelatin:titanate = 80:20) exhibited a compressive modulus of 30.57 kPa. The sample with a composition of 15.10% gelatin, 2% Na2Ti3O7, and 82.9% DI water, processed by the mixture design technique, showed the highest yield of 30.57 kPa in the compression test.
The purpose of this research was to learn the formation of biomedical scaffold material from gelatin by using titanate (Na2Ti3O7), which is a newly synthesized derivative of titanium dioxide (TiO2) with gelatin. It was prepared by mixed several solutions and cross-linked molecules by heating and salt-leaching. The biomedical scaffold was formed, and its porosity depended on the size of the salt crystal. The mixture was designed by using a mixture design with three factors: gelatin, titanate, and deionized water to determine the optimal mixture for the tensile strength of the biomedical scaffold. The microstructure of the biomedical scaffold was studied using scanning electron microscopy (SEM). The findings revealed that Na2Ti3O7 thoroughly pen-extracted the biomedical scaffold, and the tensile strength of the gelatin/titanate scaffold was higher than the biomedical scaffold, which was formed using pure gelatin. By using the mixture design technique, the 14.73% gelatin, 0.2% Na2Ti3O7, and 85.07% DI water got the highest yield of tensile strength (1508.15 kP). This was an about 4.88% increase in the tensile strength property when compared with using TiO2.
This research focuses on optimizing ultrasonic welding parameters to enhance wire terminations, which are crucial for automotive electrical systems. Using response surface methodology with a Box–Behnken design, we systematically evaluated key parameters amplitude, air pressure, welding time, weld bond height, and weld bond width to maximize tensile strength and minimize electrical resistance. Optimal settings were identified: an amplitude of approximately 19798 Hz, air pressure at 5 MPa, and welding time of 5 s, resulting in high tensile strength and superior weld quality, with desirability scores of 0.9909. Significant factors affecting peel and pull forces were amplitude, welding time, and weld bond width, while air pressure and weld bond height were less critical. Further experiments confirmed the reliability of these optimal settings, matching predicted values. SEM micrographs provided detailed visual confirmation, showing complete bonding on both sides of the die ridge, thus ensuring the integrity and strength of the ultrasonic welds. These findings underscore the importance of precise parameter control in ultrasonic welding, contributing to improved practices in the automotive and other manufacturing industries.
This research aimed to enhance strength of Nanofiber like Biopolymer as raw material for characterization which is popularly used in food and cosmetic industry and as medical material because it did not hazardously affect human body. This study employed Nano fiber characterization with Electrospinning Method by using gelatin/CMC, common and inexpensive biopolymer with cellulose that could strengthen Nanofiber.The fabrication of fiber scaffold by electrospinning method produced nano-fiber by dissolving gelatin in organic solvent, 2,2,2-trifluoroethanol, and dissolving CMC in DI water. The design of experiment was surface responds and 3 factors were analyzed including 1) gelatin concentration varied from 8-12%, CMC concentration in range of 0.6-1.0% and 3) mixture percent of CMC in range of 10-30%. After the test of tension, the highest value was 13.99Mpaderived from gelatin with 10.64% concentration, CMC with 0.81%concentration and mixture of CMC with 17.79% concentration. After that, the work piece obtained from mixing CMC with concentration at 10, 20 and 30%, 10% Gelatin and 0.80%CMC as constant due to highest volume of product from such 3 values, was tested for decomposition compared with pure-scaffold gelatin. The findings revealed that decomposition rate of CMC mixture at 20% concentration was slowest and it could be found that the result of tension testing and decomposition testing was consistent. That is, 10% Gelatin, 0.8% CMC and 20% CMC mixture gave the best value in both experiments. Additionally, it was obvious that pure-scaffold gelatin took only 1 hour to totally decompose while CMC mixture at 10%, G91 that degraded entirely in 24 hours, CMC mixture at 30%,G73 degraded in 48 hours, CMC mixture at 20%,G82 degraded in 54 hours to decompose entirely with CMC mixture. It means that using CMC which is cellulose derivative as ingredient in scaffold gelatin could strengthen it better.